Hi Guys,
I will appreciate your comments and help here.
I am using following head unit.
Pioneer f700BT
AVIC-F700BT - Pioneer Product Archive
Pioneer f700BT
Audio
MOSFET 50 W x 4 Amplifier Yes
Equaliser Yes
************************************************** ****
I have following rear Speaker
JBL: GTO-938 - 6"x9"
3-way 6x9 speakers
Power Handling: RMS 100 Watts
Power Handling: Peak 300 Watts
Frequency Response (±3dB) 45Hz-21kHz
Sensitivity 94dB
************************************************** *********************
I have just purchased following amplifier . (needs to be connected)
Pioneer GM-6400F
GM-6400F Pioneer - Amplifier - Car*Entertainment
Maximum Output Power 4 x 120W or 2 x 300W (4Ω)
CEA 2006 Power (THD + N = 1%) 60 W RMS X 4
Continuous power output (RMS)• 14.4V (20Hz-20kHz/4Ω): 4 x 60W / 2 x 150W (bridged)
• 14.4V (20Hz-20kHz/2Ω): 4 x 75 W
Load impedance capability4Ω
Frequency response(+0dB , -1dB) 10Hz ~ 50k Hz
Distortion
S/N ratio> 95 dB
LPF80 Hz (-12 dB/oct)
HPF80 Hz (-12 dB/oct)
RCA terminalsYes (input/output)
I am looking to purchase new front speakers.
My questions is that the above amp provide 60W RMS per channel when using with 4 channel.
Which 6.5 (17CM) front speaker should I purchase ? i.e.
http://www.alpinecaraudioonline.co.u...ne%20SPG-17CS/
Another question is that my rear 6x9 speaker are 100 RMS so will they work fine with GM-6400F amp OR do i have to change them ?
I want the best possible combination to work with my amplifier.
Flexible in budget
Regards
Shaz
