Need a single sealed box design/plan/cutsheet

[Immociide 10+ year member]

3/4 MDF is .75 inch so 13.25" x 13.25" x 13.25

You can do it that way or take the easy way and use a calculator that will factor in the wood thickness for you like the ones on this site.

http://www.bcae1.com/spboxnew2.htm

The site is actually very informative....

 

[ciaonzo 5,000+ posts]

lol

 

[DNick454 10+ year member]

3/4 MDF is .75 inch so 13.25" x 13.25" x 13.25
You can do it that way or take the easy way and use a calculator that will factor in the wood thickness for you like the ones on this site.

http://www.bcae1.com/spboxnew2.htm

The site is actually very informative....

I didn't know you only put up ONE wall on each axis? Kinda leaves you with an unsealed box. Top and bottom of box (3/4 + 3/4 = 1.5") Same can be said for the front and back and sides. The internal volume is 1.5" less than outside because there are TWO pieces of MDF (one on each side?)

Elementary math > you

 

[dr_peeb 10+ year member]

Poor math skills, Juggalo. Or poor visualization. Or ... somethin' anyway.

 

[Immociide 10+ year member]

mostly bad visualization //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif Im the type who cant visualize things in my head very well. The only way I can is when i have everything either written down or laid out in front of me. Anyways that is why i use that site //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[supermaxx123 10+ year member]

to get an exact 1.25 sealed. inside would be 13 1/4 x 13 1/4 x 13.

Outside would be any which way 14 3/4x 14 3/4x 14 1/2

Thats is no braces inside, I would double baffle the front but add it on the outside.