need a box design for two 15s for escalade...

[aaron7114 10+ year member]

http://www.qpowerinc.com/qPower/speakers.asp
which ones are they?

Its either the premium or the deluxe.

im off to bed though...i will check here in the morning. Hopefully you can figure up a good design for them. I really appreciate your help!

 

[IgnoreMe 5,000+ posts]

honestly since i dont have much to work with at all with these subs (as you can see by the link)

just do:

45" wide

18" high

22.5" deep

make the port 5" wide, 16.5" tall (hell even 82.5 sq in of port is probably over kill for these subs), 16" deep. this will put you at ~7.5^3ft with ~35hz tuning.

 

[aaron7114 10+ year member]

I decided to just do the port on the side instead of the middle since its quite a bit easier to do.

http://www.subwoofertools.com/forum/ported-box.asp?Ew=40&Eh=18&Dia=9&Xmax=12.5&Vd=0.14&NumW=2&Vb=5.5&Fb=34&Qts=&Vas=&Fs=&CE=0

5.5 cubic ft tuned to 34 hz with 78 square inches of port area?

That sound good? Too small? too much port area?

 

[aaron7114 10+ year member]

any input on the above box? Plan to start on it in the morning...

 

[aaron7114 10+ year member]

well the lumber store was closed today so I wasn't able to buy the wood to build the box.

So I still have a little time to get some input on the above box.