Narrowed down to two

  • 2
    Participant count
  • Participant list

khi
10+ year member

¤ Iñdi° Møâñin ¤
i would start looking into component systems/midbass drivers instead of coaxials. i own the 2nd pair on there, and you really dont get much midbass, but the highs are pretty clear. i would much rather have a nice set of components or if you are only looking for midbass, then you can buy a dedicated midbass driver.

BTW, how is that shop going (if it wasnt a joke //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif)

-nate

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

I have confirmed through JL that these subs have just over 1inch xmech. As long as there is 1inch clearance in front of the front edge of the...
1
499
I got it to work, I was plugging in the subwoofer while the amp had power. I unhooked the remote turn on lead, then all speakers plugged in, then...
4
676
yall. I unplugged the radio harness and the antenna and plugged it all back in and it works. I guess its fixed… suppose it was the head unit...
3
812
Cool down, bro. and have a happy thanksgiving. I was merely inquiring in response to someone else's post that cautioned about clicking on the...
12
1K
Yes, the power wires' colors don't match from the dash to the new harness. However, I tested them and the wire I'm treating as the constant 12v is...
9
1K

About this thread

khi

10+ year member
¤ Iñdi° Møâñin ¤
Thread starter
khi
Joined
Location
Calgary, AB
Start date
Participants
Who Replied
Replies
1
Views
1,161
Last reply date
Last reply from
nswartley
1000007975.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0
1000007974.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0

New threads

Top