My SAZ-1000D sucks!

[bamaster 10+ year member]

ugh.. yes it comes off, the gasket i think you're meaning?

hehe... yeah.

that box looks small!
How much is the shop going to charge to pull the sub out, rewire it, and put it back in?

ITS NOT HARD TO DO!

Wait, you might puncture the surround, nevermind! lol.

I'm not the DIY type. I'm too pretty.

//content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

Be right back.

 

[audioholic 5,000+ posts]

Terrible thread title.

 

[CobraStang98 10+ year member]

Or so I thought.
I had a SAX-125.2 powering my Stereo Integrity Mag 12" sub. Well, the 125.2 runs 400w at 4 ohms. So that's the way the sub is wired.

I replace my 125.2 with a brand new SAZ-1000D, which runs 1000 watts at 1 ohm... but only 300w at 4 ohms.

So I plug it in and I can barely hear the **** thing. I'm like, this amp sucks! Then I remembered that the sub is wired for a 4 ohm load.

//content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

It's dark out and the mosquitoes are killing me. I'll take my car to the shop tomorrow and have it wired right. I'm excited to see what the Mag can do with 1000 watts plugged into it!

//content.invisioncic.com/y282845/emoticons/veryhappy.gif.fec4fed33b4a1279cf10bdd45a039dae.gif

***

 

/thread

 

How can u not know how to wire it to 1 ohm?? It's prolli the single most basic thing involved in wiring a system w/ 4 or less woofers.

 

[dbeez 5,000+ posts]

Yes hate the title very bad choice in name

 

[Ellsworthz 10+ year member]

can you even hear the sub @ 6k rpms? lmao.

i hate mustangs,

but I respect a Roush TVS

 

[528hz 10+ year member]

hehe... yeah.



I'm not the DIY type. I'm too pretty.

//content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

Be right back.

 

[BobbyDD 10+ year member]

that box looks small!
How much is the shop going to charge to pull the sub out, rewire it, and put it back in?

ITS NOT HARD TO DO!

Wait, you might puncture the surround, nevermind! lol.

That's what I'm expecting to happen.//content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

 

[CobraStang98 10+ year member]

can you even hear the sub @ 6k rpms? lmao.
i hate mustangs,

but I respect a Roush TVS

Yes i can and an RE SX + 1k watts + 5500+ rpm = pure *** to my ears.

 

[bamaster 10+ year member]

That's what I'm expecting to happen.//content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

hehe... why y'all hatin'?

It sounds much louder now. But I don't know much about tweaking the settings on the amp. I might have to fool around with it tomorrow when I can see. I've never tuned a system so I'll be winging it.

can you even hear the sub @ 6k rpms? lmao.
i hate mustangs,

but I respect a Roush TVS

More hatin'?! //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

Well, I ain't much for F bodies. This is my fourth Mustang. It's the best one I've had. The TVS is nice. But I regret not getting the Roush TVS with Short Block kit. I could have taken it to 650 rwhp without a problem.

At this point, it's a $10k upgrade for a new motor with all the other upgrades I'd need, like brakes and torque converter and tuning. Not worth it for me. The car is fun enough. But quieter than you'd think.

Peace!

 

[GMCJimmyslt2000 10+ year member]

If u can't rewire a sub, u have no right to own any caraudio equipment.

 

[James Bang 5,000+ posts]

watch your gains because the v4 will bottom out quick.

 

[MmatsDude 10+ year member]

wow

 

[WhoSayWho? 5,000+ posts]

Or so I thought.
I had a SAX-125.2 powering my Stereo Integrity Mag 12" sub. Well, the 125.2 runs 400w at 4 ohms. So that's the way the sub is wired.

I replace my 125.2 with a brand new SAZ-1000D, which runs 1000 watts at 1 ohm... but only 300w at 4 ohms.

So I plug it in and I can barely hear the **** thing. I'm like, this amp sucks! Then I remembered that the sub is wired for a 4 ohm load.

//content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

It's dark out and the mosquitoes are killing me. I'll take my car to the shop tomorrow and have it wired right. I'm excited to see what the Mag can do with 1000 watts plugged into it!

//content.invisioncic.com/y282845/emoticons/veryhappy.gif.fec4fed33b4a1279cf10bdd45a039dae.gif

Did you give any thought to the fact that most of the people who see the title of your thread will not actually read your post?

Later, they will just have a vague recollection that someone was not pleased with the product. They may never know that you were just being "cute" and your lack of intelligence may cause Sundown to lose sales.

Nice going shit for brains.

 

[Varinabassing 10+ year member]

[quote name=bamaster;6173062

More hatin'?! //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

Well' date=' I ain't much for F bodies. This is my fourth Mustang. It's the best one I've had. The TVS is nice. But I regret not getting the Roush TVS with Short Block kit. I could have taken it to 650 rwhp without a problem.

At this point, it's a $10k upgrade for a new motor with all the other upgrades I'd need, like brakes and torque converter and tuning. Not worth it for me. The car is fun enough. But quieter than you'd think.

Peace![/quote]

How far from VA are you in about a month i will have new motor ready to go and i wouldnt mind running something like this lol Have you seen the super snake Those things are nasty ha my buds gto got smoked buy one the other day its the only one around this way thou being most people could buy a z06 for less lol Anyway like the other fbody guy i must respect you mustang just really cant stand the wanna be fast gts around here lol //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[Pioneer~Saturn 5,000+ posts]

Yea, I dont think the title was necessary at all...