My first ported build and I need help!!

[Tisdaleskarbass]

This is my 94

 

[Louisiana_CRX 5,000+ posts]

One thing that might help on an enclosure in one of these trucks ..I did this in my 91 F150 and my 89 Jeep Comanche regular cabs is use the back wall as part of your enclosure...I deaden both well and that enabled more airspace from a normal tight fit ...I also did the same in my 2012 Silverado standard cab...here's a pic of it from last night's rare snow in Louisiana...

 

[Louisiana_CRX 5,000+ posts]

Good looking truck and looks like nice wheels also

 

[Tisdaleskarbass]

Good looking truck and looks like nice wheels also

Thanks and I’m trying to get it nicer little by little trying to get these subs in there

 

[Louisiana_CRX 5,000+ posts]

Thanks and I’m trying to get it nicer little by little trying to get these subs in there

If you can get them in and keep the room you want it will be nice.
I've always ran sealed in my standard cabs ...

 

[Tisdaleskarbass]

If you can get them in and keep the room you want it will be nice.
I've always ran sealed in my standard cabs ...

You don’t think a ported box will help it hit lower?

 

[Louisiana_CRX 5,000+ posts]

You don’t think a ported box will help it hit lower?

Sure but 4 cu ft is a lot of airspace plus port ...you'd almost have to do a blow threw to get the space you need especially with a bench seat ...