My First Box(pics)

[Shyne151 10+ year member]

Some of you guys are ****ing tools. Some people haven't been building boxes since they were 15. Give the kid a break, its his first box.

Next time do a test fit first, then you will notice the gaps and can correct before you assemble it.

 

[RAM_Designs 5,000+ posts]

and im sure your first build was some sort of masterpiece //content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

For 2 Xtant X1244's....4 cubes net tuned to 28hz. Infinitely better than that box he made....1) sh!t overhanging 2) port doesn't even stay the same width all the way down 3) port is probably 1/2 as long as it should be 4) 3+ft^3 for a single 12 is too much.

 

[ThomasG 5,000+ posts]

LOL shoulda built it to the specs of you TRUNK

we did but after the build we noticed some plastic cones sticking out on the bottom so that ruined it all and after hearing this box i had to keep it

 

[acold7dusta 10+ year member]

we did but after the build we noticed some plastic cones sticking out on the bottom so that ruined it all and after hearing this box i had to keep it

plastic cones on the bottom of your trunk?

 

[ThomasG 5,000+ posts]

For 2 Xtant X1244's....4 cubes net tuned to 28hz. Infinitely better than that box he made....1) sh!t overhanging 2) port doesn't even stay the same width all the way down 3) port is probably 1/2 as long as it should be 4) 3+ft^3 for a single 12 is too much.

the port is the same length all the way down. All your doin is sayen my shit sucks and you showen off... the **** outta here

 

[ThomasG 5,000+ posts]

plastic cones on the bottom of your trunk?

not exactly cones but little plastic bulges that form outwards

 

[Worlddre 5,000+ posts]

well then i take that back still no need to be a dick to the guy maybe give some tips

 

[acold7dusta 10+ year member]

not exactly cones but little plastic bulges that form outwards

well, if you cant remove them, you could always make spacers for it to sit evenly, and then anchor it down

 

[ThomasG 5,000+ posts]

well then i take that back still no need to be a dick to the guy maybe give some tips

serieousely. I didnt make this thread to get praised on how good my box is, or what a piece of shit it is. I made it to get some advice

 

[SAG3 5,000+ posts]

Lol, WTF, you, ****, LOL. Kill yourself.

kthxbye

 

[azbass 5,000+ posts]

id start with having all the pices of the box line up. every pice i see on that box is overlaped with another pice. and i dont even know what you did with the port.

 

[ThomasG 5,000+ posts]

well, if you cant remove them, you could always make spacers for it to sit evenly, and then anchor it down

this is what im talken about

 

[SAG3 5,000+ posts]

I don't see anything.

 

[azbass 5,000+ posts]

also let me guess that box is not bolted down, i also think the amp is not either...

 

[Pyro_By_Nature 5,000+ posts]

Now now children, take two steps back away from the table saw, and take a minute to think.Next time grab your friend's dad, or a friend that passed wood shop.