Fenway99
Junior Member
Current vehicle is set-up with a crossover used with the front speakers and sub. I want to chage it to front and rear speakers only, is it as simple as just wiring the outputs from the head to the crossover inputs?
Activity
No one is currently typing a reply...
Similar threads
Thanks buddy!
Given me a lot to think about in terms of what to do; I've been watching YouTube videos on this stuff all day as well so I really...
- Started by Jodhvir Minhas
- Amplifiers
You can wire those subs up @8 ohms if they are both SVC4 ohm subs,and that amp will run fine after being tuned properly...
- Started by KarRamRod1999
- Subwoofers
The 240 should be 2x40/ 2ch. rated at 11.9v. Should generate close to 50+ @14v rms. Only Rated @4 ohms bridged Mono.. Should be around 125 rms...
- Started by It happens
- Amplifiers
In 1990:
The MTX MTA 225 had a MSRP of 549.95
25x2 0.02% THD S/N 102 12x 8 1/2x 2 3/8
The MTX MTA 250 had a MSRP of 649.95
50x2 0.02% THD S/N...
- Started by Courtbass
- Amplifiers
12db is usually 180° out of phase if used left and right. 24db makes the full 360° phase change when running left and right.
This is...
- Started by Taxed1
- General Car Audio
About this thread
New threads
-
After market stereo wiringI'm having issues color coordinating my wire colors on my 05...- Started by Darrell Robinson
- Replies: 0
-
WANTED 4 gauge OFCLooking to buy some 4 gauge OFC. Let me know if you have...- Started by AnthonyO
- Replies: 1
-
Another VS ThreadLooking to go for a cheap SQL build in the back of my Jeep...
- Started by Blackout67
- Replies: 16
-
Running two pairs of component speakers activeHello everyone. I need some advice. I am considering...- Started by 6r33n3y3z
- Replies: 10
-
Im trying to hook up a 4 channel ampI currently have a stock head unit with stock amp with jbl...- Started by William Melcic
- Replies: 2