More Extreme Pics...

[NDMstang65 10+ year member]

that wont get rid of the ripple in the metal though... eaither way, its going to be a PAIN in the ***. your best bet (imo) would be to tack on a sheetmetal panel to the bottom side of the hole (try and flex it up a bit) and fill it with kittyhair until its smooth.
but still, that metal is rippled to hell... looks like its more than 1\2" ripple in more than once place //content.invisioncic.com/y282845/emoticons/uhoh.gif.c07307dd22ee7e63e22fc8e9c614d1fd.gif

and i know from expierence... a garage collapsed on our 1965.5 mustang, and we had to cut a 15"x30" section out of the roof, and weld a new metal piece in, brace it underneath, and fill it with kittyhair.

its alot harder than i thought itd be.

Dude...I do body work...chill

Don't worry about it

Stretching fleece across the roof and making fiberglass out of it will take care of it (Uh oh...new concept?..your forgetting i do fiberglass work aren't ya?)

This is not a show car anyhow...i wouldnt ever have cut metal out of something that was worth a **** like that...i know better...

Word of advice - Don't come to my shop and tell me how to do things....

That's like me trying to tell Mark Eldridge or Gary Biggs how to build an sq car - I'd never do that...i'm not that stupid

 

[req 5,000+ posts]

Dude...I do body work...chill
Don't worry about it

Stretching fleece across the roof and making fiberglass out of it will take care of it (Uh oh...new concept?..your forgetting i do fiberglass work aren't ya?)

This is not a show car anyhow...i wouldnt ever have cut metal out of something that was worth a **** like that...i know better...

Word of advice - Don't come to my shop and tell me how to do things....

That's like me trying to tell Mark Eldridge or Gary Biggs how to build an sq car - I'd never do that...i'm not that stupid

hey man- chill out. it just surprised me that you cut up the roof like that. i can do bodywork too, im not going to your shop or telling you what to do. just giving suggestions //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

dont get your panties in a bundle man, and aside - i have no idea how 'talented' you are, or that you own a shop. for all i know, you may be helping somone. so relax //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

 

[NDMstang65 10+ year member]

Dad's shop actually, and I work with him...

I don't believe in chop jobs, but SPL is another story...and this is how it goes.

 

[Primo 10+ year member]

good luck getting that truck to go past 20mph.

 

[DBfan187 5,000+ posts]

good luck getting that truck to go past 20mph.

it's not ment for driving pruposes

 

[ss3079 5,000+ posts]

good luck getting that truck to go past 20mph.

That's the last thing that they'll ever need.

I'm sure it'll see nothing but the lanes, a test area (shop), and a trailer.

If need be, Nick would be the one that could do it though.

 

[Incriminator 10+ year member]

A List of Questions

1. 1 18 MT Right?

2. How many spiders?

3. What ohm coils?

4. AL or Copper?

5. Your getting how many AC Amps?

6. Your getting how many AC Volts?

7. How many layers do you have on the box?

8. Where all did you put concrete?

9. How big is the box?

10. How much port?

11. What does the baffle look like?

12. How thick is the baffle?

13. What way does the sub fire?

14. How many batterys do you have and kind?

15. 16 volt system?

16. How much are the amps drawing?

17. Peak feq?

18. What kind of head unit?

19. On a burp how much does the voltage fall?

20. Explain the interior layout?

21. What kind of vehicle?

22. What kind of X-max are we talking (less the better)?

23. 3db down point?

24. What does the console look like?

25. Please draw lots of pictures?

Nick, you know I love X car and I've built a few...I'll just start with them first 25 questions.

//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif//content.invisioncic.com/y282845/emoticons/banghead.gif.8606515f668c74f6de0281deb475b6fd.gif

 

[NDMstang65 10+ year member]

A List of Questions
1. 1 18 MT Right? sure why not

2. How many spiders? twenty three and a half...(3 seriously)

3. What ohm coils? dual 1.4's

4. AL or Copper? copper until i call precision and/or david and get a beefy AL flatwire...

5. Your getting how many AC Amps? 1 //content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif

6. Your getting how many AC Volts? 5 //content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif

7. How many layers do you have on the box? 9" thick

8. Where all did you put concrete? roof, floor, various other places

9. How big is the box? as big as the inside of the vehicle

10. How much port? same as cone area

11. What does the baffle look like? looks like a baffle with a sub in it

12. How thick is the baffle? bout 19 feet

13. What way does the sub fire? can't tell ya...or i'd have ta shoot ya //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

14. How many batterys do you have and kind? um...dont know..i think seths got 20 8v's? Exides

15. 16 volt system? of course

16. How much are the amps drawing? good question

17. Peak feq? depends on what's in it //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

18. What kind of head unit? panasonic

19. On a burp how much does the voltage fall? .2v...after 3 hours of testing the batts were still sitting at 16.2v..and hadn't been charged for 3 months

20. Explain the interior layout? it's a bunch of wood with concrete and a moofer somewhere in it

21. What kind of vehicle? blazer

22. What kind of X-max are we talking (less the better)? bout dat much //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif..no more then 32mm for obvious reasons

23. 3db down point? good question

24. What does the console look like? like your hero's

25. Please draw lots of pictures? sure...i draw lots of pikatures for you

Nick, you know I love X car and I've built a few...I'll just start with them first 25 questions.

//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif//content.invisioncic.com/y282845/emoticons/banghead.gif.8606515f668c74f6de0281deb475b6fd.gif

good 'nuff?

 

[bigbassman Premium Member]

lmao.. nick morgan wins!

Loyd L.

 

[Incriminator 10+ year member]

lmao.. nick morgan wins!
Loyd L.

Only if Seth does 173+

//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[NDMstang65 10+ year member]

Only if Seth does 173+
//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

shiii

Don't make me have to tell seth to turn the SQ off on that pimp *** panasonic CD player boyeeeee //content.invisioncic.com/y282845/emoticons/up2something.gif.dd110ecf3ae4b76050d87598f2f8de7c.gif//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif//content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif

 

[Buckshot 10+ year member]

Hmm seems like I may have to work to curl that now. It was still light with just an MDF interior lol, now shes gettin to be a workout.

 

[NDMstang65 10+ year member]

lmao.. nick morgan wins!
Loyd L.

//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif//content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif

 

[NDMstang65 10+ year member]

change..sig..test..

 

[ngsm13 5,000+ posts]

change..sig..test..

HAHAHAAHAHAH, did you ever get you're signed dust cap?

NG