mixing jbl with jlaudio

[poot9191]

hello I am have been a instller of stereos for

5 years now build all competion grade stereos and some little one and I am completly stumped Recently I installed a fairly decent size stereo in my 1991 toyota pickup xtra cab it concests of a blaupunkt cd player fulton eq crssover jbl 600.1 a jl 12w3d2 infinty highs and pioneer amp for the highs I have four gauge wire 1 farad cap

the best rcas and this is my problem the bass sounds good but it is not loud every time I turn it up it sounds like the one jl is going to pop

it is in a 1-1/4 cubic feet box and I have the woofer set up for a two ohm load so whats the deal speand all that money for what someing that

sounds good but is quiet please help email me at Poot9191@aol.com

Click to read more...

 

[BASSBOY 10+ year member]

Do you have a divider in their boxes? if not you should cause the speakers are different and have different excursions and ect. try that and the jl will be nice and happy with its own air space.

 

[Matt 10+ year member]

Have you tried another sub with the amp? I think you may be over powering the sub...??? You could run 2 JL's with that amp. Are you running the amp bridged? You dont wanna run DVC's in stereo... POP is what that would do. Any damage to the sub? VC? been dropped?? How are you running the VC's? In series? several things could be the culprit. Good luck and happy hunting

 

[80INCHES 5,000+ posts]

i see no problem with it

 

[JimJ 5,000+ posts]

However, I do see a problem with bumping a four year old thread.