Melted terminal on box??!!! (PICS)

[lambofgood91 10+ year member]

For some reason I opened my trunk today to find that my positive terminal on my box was MELTED. The + speaker wire going to my amp is actually fused to it now. Its all black and charred too. Anyone know what could have caused this?!?? //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

Click to read more...

 

[99grandprixGT 5,000+ posts]

that *****. i had those same terminals on my box. worked great.

 

[lambofgood91 10+ year member]

that *****. i had those same terminals on my box. worked great.

U have any idea what could have gone wrong!?!?

 

[99grandprixGT 5,000+ posts]

what sub and amp are u using by the way?

 

[lambofgood91 10+ year member]

bump for answers

 

[swx1042 10+ year member]

How much power are you pushing?

 

[mlstrass 5,000+ posts]

loose connection sparking would be my guess...

 

[lambofgood91 10+ year member]

what sub and amp are u using by the way?

2 12" AQ HDC3's on an AQ 2200.

 

[lambofgood91 10+ year member]

How much power are you pushing?

About 1500ish i would say right now because im using my stock alternator

 

[gotparts90 10+ year member]

bad connection or the terminal cup is not rated for the load that is on it. maybe the wire just came loose and started to back out causing some arcing.

 

[lambofgood91 10+ year member]

Oh yea im running @ 1 ohm too

 

[pr-festiva 10+ year member]

bad connection or the terminal cup is not rated for the load that is on it. maybe the wire just came loose and started to back out causing some arcing.

X2

 

[lambofgood91 10+ year member]

bad connection or the terminal cup is not rated for the load that is on it. maybe the wire just came loose and started to back out causing some arcing.

Could I ask what arcing is?? //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

 

[michaellane 5,000+ posts]

this is caused when the ground to the amp is not tightened up enough...thats what i read online...

 

[mlstrass 5,000+ posts]

he means the connection wasn't solid, so the current was arcing/jumping to make contact which gives off sparks and tends to melt ****...