looking to buy everything needed for a big 3 upgrade

[alec14 10+ year member]

i'm looking to buy everything i'd need to do the big 3 upgrade. that would include 0 gauge wire, terminal connectors, and whatever else someone has used before in their big 3 upgrade. this is my first time doing it

Click to read more...

 

[mylows10 5,000+ posts]

about 12-15 ft of 0 gauge ofc withe 1 fuse block and fuse and 6 ring connectors .depends on your vehicle for how much wire needed.

 

[alec14 10+ year member]

about 12-15 ft of 0 gauge ofc withe 1 fuse block and fuse and 6 ring connectors .depends on your vehicle for how much wire needed.

do you have any of that? and the car is a chevy malibu, so probably around 15, i'm guessing.

 

[JoiNt- 10+ year member]

ebay dude u can get 0 gauge knukonceptz wire and ring terminals on there for cheap and a fuse just do some browseing

 

[mylows10 5,000+ posts]

do you have any of that? and the car is a chevy malibu, so probably around 15, i'm guessing.

yes i have it all do you have a budget ?

 

[alec14 10+ year member]

yes i have it all do you have a budget ?

if at all possible, around 65-75, depending on how much 0 gauge there is

 

[mylows10 5,000+ posts]

measure to see how much you need

 

[CAT MAN 5,000+ posts]

if at all possible, around 65-75, depending on how much 0 gauge there is

100 bux will get you my 4/0

 

[alec14 10+ year member]

what exactly is 4/0? and i'll measure it up soon

 

[CAT MAN 5,000+ posts]

0000 guge

 

[RAM_Designs 5,000+ posts]

I'm doing full terminated and heat-shink'd Big 3 kits for $60 shipped if you're interested. The wire used is Audio Technix over-sized 1/0 CCA.

 

[cyn 10+ year member]

You honestly shouldn't need more than about 8ft of wire for that car unless that battery is in the rear but i know its not... my impala i'm using a max of 6ft of wire..

Remember you'll have to get a wire that you can run through the eld/voltage meter thats by the battery.. I think 2g is the biggest I can get through mine... unless you dont' mind the errors on the dashboard

 

[alec14 10+ year member]

cyn, so you're saying i'll have to go to 2 gauge instead of 0? and ram_designs, in the kit is there everything required, like ring terminals and fuses? mylows10, i'm guessing around 15 feet, just to be completely safe. mylows10, pm me a price. ram_designs, please pm me also

 

[Nitefury360 10+ year member]

I have 8 ft of cca 0 gauge 2 4ft pices 1 with copper lugs an heat sink the other with 1 copper lug and heat shrink I'll throw In 4 0 gauge ring terminals and a 0 gauge fuse holder for 40 shipped on me

 

[alec14 10+ year member]

I have 8 ft of cca 0 gauge 2 4ft pices 1 with copper lugs an heat sink the other with 1 copper lug and heat shrink I'll throw In 4 0 gauge ring terminals and a 0 gauge fuse holder for 40 shipped on me

pm me please

 

---------- Post added at 07:11 AM ---------- Previous post was at 07:10 AM ----------

 

I'm doing full terminated and heat-shink'd Big 3 kits for $60 shipped if you're interested. The wire used is Audio Technix over-sized 1/0 CCA.

does the kit have everything i'd need? and how much wire is in a kit?

 

---------- Post added at 07:12 AM ---------- Previous post was at 07:11 AM ----------

 

measure to see how much you need

i'm guessing around 15 feet, just to be safe