Looking for 01 Chevy Crew Cab Box

[TBrown]

I own a 2001 Chevy 3500 Crew Cab truck and I'm just wondering where I might be able to buy a sub box. I have looked on the internet but can't seem to find anything. Any help would be great.

Click to read more...

 

[Lakota 5,000+ posts]

Are you keeping the back seats?

 

[TBrown]

Yea I need to keep the back seat. I race stock cars and travel alot with people. So i'm just looking for something that will either go under the seat or behind it.

 

[JeffyZ33 10+ year member]

How much room is there under the seat?

 

[TBrown]

not much. there is a lot of seat brackets, the bottom seat folds up and the back part can fold down.

 

[JeffyZ33 10+ year member]

From the looks of that, you're not going to fit ANYTHING under them. Maybe it's just the picture, though. Any idea of how much depth you can fit under there?

 

[TBrown]

There is only about 8 inches

 

[Ignatowski 5,000+ posts]

go to Subthump.com or

Proboxrocks.com

 

[xplcitcustmz 10+ year member]

i built a box that holds 4 JLw1 10's behind the back seat in my crew cab, i will take some pics to post up

 

[NeverEnuffBass 10+ year member]

JL W0's and W1's will fit under the seat

 

[yz_gt69 10+ year member]

for mine, i fabbed up some blocks and actually lifted the back seat about 2 inches, that allowed me to build a box that hosts my two mtx 12's. keep in mind tho that i have an extended cab.

you could consider that, hell you could even do it by simple cutting some 2x2 bar stock. from what the pics show, it shouldnt be too hard, i dont think there will be a diff from yours to mine. does the back of the seat flip down?? in mine I welded a tab onto the latch that keeps the back in place b/c the lift wasn't allowing it to grab properly, that was the only problem tho.

 

[xplcitcustmz 10+ year member]

for mine, i fabbed up some blocks and actually lifted the back seat about 2 inches, that allowed me to build a box that hosts my two mtx 12's. keep in mind tho that i have an extended cab.you could consider that, hell you could even do it by simple cutting some 2x2 bar stock. from what the pics show, it shouldnt be too hard, i dont think there will be a diff from yours to mine. does the back of the seat flip down?? in mine I welded a tab onto the latch that keeps the back in place b/c the lift wasn't allowing it to grab properly, that was the only problem tho.

ive done lots of JL w3v2 installs in ext cab, never had to raise the seat though, down firing box as well