look at this beastly sub!!!

[Shinju 10+ year member]

A quad 1ohm 4inch coil so there is 4 14ga positives and 4 14ga negitive wires.

More then enough.

 

[AQHDC3 10+ year member]

If this was a lot cheaper it would be fun to play with.

 

[mrogowski 5,000+ posts]

my 600w rms sub uses 10 or 12
would you run 5000w to a sub through 14 ga?

Well, 14 gauge is a heck of a lot larger than the tinsel leads used, or for that matter the voice coil wire. Your house wiring is probably done with 14AWG. Don't get swept up with the hype you hear...

 

[IMOVeCHICKENS! 10+ year member]

shoulda used 8ga direct connect, sub woulda sold instantly

/endsarcasm

 

[hatedonmostly 5,000+ posts]

shoulda used 8ga direct connect, sub woulda sold instantly
/endsarcasm

//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif tool

 

[hatedonmostly 5,000+ posts]

Well, 14 gauge is a heck of a lot larger than the tinsel leads used, or for that matter the voice coil wire. Your house wiring is probably done with 14AWG. Don't get swept up with the hype you hear...

then i'll wire my box with the 22 gauge my factory rear speakers were wired with because i had it laying around after i took my rears out //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

 

[rusty_armadillo 10+ year member]

the surround on this thing makes it look like a pro audio type speaker. pretty darn ugly

 

[SPLaudio 5,000+ posts]

112lbs in the crate so the crate isnt light eather. that is a ol school earthquake and pro audio basket i havent seen on a car audio sub in 10+ yrs.

could be a good sub cant tell totally by looking at it not knowing anything about the soft parts...

 

[mrogowski 5,000+ posts]

then i'll wire my box with the 22 gauge my factory rear speakers were wired with because i had it laying around after i took my rears out //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

Whatever tickles your fancy...

 

[massiveaudio 10+ year member]

Hello Everyone, Thanks for looking at The Rhino-

to clear a few things the wire is actually 8 AWG and it is pure 100% copper, not mix metal clad ect..

You can now view a link to a pdf that has a little more information about this woofer. https://www.massiveaudio.com/store/product.php?productid=16245&cat=285&page=1

We will have videos posted soon of people that are using this for shows and installs.

These are all hand built and as someone pointed out it is similar to a pro audio design.

Thanks and if you have questions please let us know.

Partial sponsor requests should be sent to chyler@massiveaudio.com

My Community - Index