just ordered my 12 inch sx....

[WMStateChamp18 10+ year member]

this is my box design is it gona work good or do you guys think i should change it?

Net Volume: 2.5 cubic feet

Tuning Frequency: 33 Hz

Port Width: 4.25 inches

Port Area: 61.625 Square Inches

Port Length: 54.5 inches

External Dimensions: 34 wide x 16 tall x 19.75 deep.

Board Dimensions and Quantity

Color Count Width Height

Top and Bottom 2 34 inches 19.75 inches

Red 1 29 inches 14.5 inches

Yellow 1 19 inches 14.5 inches

Black 1 32.5 inches 14.5 inches

Green 1 19.75 inches 14.5 inches

Teal 2 14 inches 14.5 inches

Violet 1 13.5 inches 14.5 inches

Number of 49x97 Sheets of 3/4" MDF: 0.75

here is one at 33hz 2.5 cu ft with 60sq inches of port

http://www.caraudio.com/vb/private.php?do=showpm&pmid=372690

and that is a pic of the box design

just comment if u want and help if u wana also thanks!

Click to read more...

 

[cversion7 10+ year member]

psst... *links to private messages don't work*

 

[WMStateChamp18 10+ year member]

how can i put that pic on here then

 

[ngsm13 5,000+ posts]

how can i put that pic on here then

Save it and rehost it //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif....

You're in Columbus? **** I was just there this weekend, we drove around showing off my setup //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif...

You'll enjoy the SX man!

NG

 

[WMStateChamp18 10+ year member]

it says that the ends should be diffrent lenghts is that wrong one is the yellow which is 19 inch and the other green is 19.75 inch is that wrong or whats goingon tehre anyone konw anything why it owuld be liek that or should they be the same?

 

[psych0ticnemes1 5,000+ posts]

sx's = wannnnnnnnnnnnnnngs

 

[WMStateChamp18 10+ year member]

questoin how do i wire my amp to be one ohm? like positive to positive and so on? i am geting the hifonics 1605D and i have a 12 sx dual 2 ohm?

 

[ngsm13 5,000+ posts]

Yes, combine both positives and both negatives.

NG

 

[WMStateChamp18 10+ year member]

well i did not konw if i had to wire it a special way to get the sub and amp to 1 ohm thats why!

 

[ngsm13 5,000+ posts]

well i did not konw if i had to wire it a special way to get the sub and amp to 1 ohm thats why!

Do it that way WILL be wiring the Dual 2ohm voice coils in parallel, making your amplifier see a 1ohm load //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif.

NG

 

[WMStateChamp18 10+ year member]

thanks

 

[kuijo 10+ year member]

it says that the ends should be diffrent lenghts is that wrong one is the yellow which is 19 inch and the other green is 19.75 inch is that wrong or whats goingon tehre anyone konw anything why it owuld be liek that or should they be the same?

MDF is .75" long so the side probably fits agianst the 19.75 and on top of the 19 //content.invisioncic.com/y282845/emoticons/uhoh.gif.c07307dd22ee7e63e22fc8e9c614d1fd.gif

 

[WMStateChamp18 10+ year member]

i dont really understand that?

 

[ngsm13 5,000+ posts]

Ummm.... look at the picture you have...

The MDF is .75", so you have to account for the overlapping of certain sides.

NG

 

[WMStateChamp18 10+ year member]

so on one end the ends of the front and ack will butt up against the end the other end the back and front will over lap the end? that what u mean?