ACOM
CarAudio.com Newbie
- Price
- $1
Looking to purchase 2 Epic 8s or 2 TC 1000 8 inch subwoofer. Also looking for 2 15 inch cones with 3 inch coil opening, 2 10 inch spiders, and 2 3 inch voice coils.
- Was Photo Included
- Yes
Hey, you should check your shocker coil thread. There were a few of us asking questions, not sure how your notifications are set up. I might want a pair of those.Coils to fit which motor? I think I have one or two 10" spiders here (without built in tinsels). I do not know of anybody who still has OEM aluminum cones and you will pay dearly for them if you can find someone who still has some old stock.
Coils to fit which motor? I think I have one or two 10" spiders here (without built in tinsels). I do not know of anybody who still has OEM aluminum cones and you will pay dearly for them if you can find someone who still has some old stock.
I only get notified for PMs here, did ship some coils to a fella in Alaska, I'll take a look at that thread.Hey, you should check your shocker coil thread. There were a few of us asking questions, not sure how your notifications are set up. I might want a pair of those.
My calipers are in inches. Can you do ID and OD in inches or just say which motor?The inner ID is 74.47 and the OD is 87.60, i am happy with non-original cones as long as they arent very thin.
Not sure what the motor is, its similar to what comes on a lightning audio storm subwoofer. Im assuming a tc9? but i am unsure what exactly it is. ID converted is 2.931 inches and OD converted is 3.448 inches.I only get notified for PMs here, did ship some coils to a fella in Alaska, I'll take a look at that thread.
My calipers are in inches. Can you do ID and OD in inches or just say which motor?
Lord of Bass has a fair selection of cones that seem to be fair quality. Pierce Audio makes a carbon fiber cone that has the tall roll surround similar to much of the old TC stuff which may perform much like those. If you don't break subs often that may be worth the extra money.
LA Storm is 3HP motor. I have coils to fit TC9 here but the ID is too tight for 3hp on the ID and all the 3hp subs I know of used an 8 layer (mine are 4).Not sure what the motor is, its similar to what comes on a lightning audio storm subwoofer. Im assuming a tc9? but i am unsure what exactly it is. ID converted is 2.931 inches and OD converted is 3.448 inches.