Is this box wrong?

[DOOM_NX 10+ year member]

Is this box wrong because of the small 2nd port section?

Click to read more...

 

[GAM3OVR 5,000+ posts]

depends on tunning freq

 

[IDSkoT 5,000+ posts]

Dear lord, mm again!

To be safe, I'd go with a 90mm width instead of 60mm. 60mm is a big on the small side, 90mm is a nice safe #.

But the second port side shouldn't matter. It looks fine.

 

[DOOM_NX 10+ year member]

Vb without speaker displacement 2.48 c.ft.

Fb 38Hz.

Oh come on, we keep increasing the port area! 34 sq.in. should be enough. It's even bigger than MTX's suggested one.

 

[Fiercetimbo17 10+ year member]

as long as that is all the necessary port are then no it is not a problem

 

[DOOM_NX 10+ year member]

Umm, yeah, suggested length is 480mm for given port area. I see no reason why I should increase port area along with box volume to get a longer 2nd port part...

 

[GAM3OVR 5,000+ posts]

Vb without speaker displacement 2.48 c.ft.Fb 38Hz.

Oh come on, we keep increasing the port area! 34 sq.in. should be enough. It's even bigger than MTX's suggested one.

may be me, but I'd tune LOWER

 

[DOOM_NX 10+ year member]

Well... MTX suggests 38Hz. I don't know. I'm building it, if it sounds like ****, I'm building another one.

 

[DOOM_NX 10+ year member]

Do u think I need bracing in this box?