Installed Kickdown - Stereo Won't Power On

[bpres9991 10+ year member]

I installed an Installer's Edge Line Output Converter, using a wire diagram for my stereo. My amp turns on, so the remote wire is fine, but now the radio won't function. Any ideas?

It's a 2004 Dodge Ram with a factory radio.

Thanks!

Click to read more...

 

[southwest713 10+ year member]

did u unhook anything behind the radio? where exactly did u hook up the LOC to?

 

[bpres9991 10+ year member]

Two wires to the rear left, and two to the rear right, that's it.

 

[southwest713 10+ year member]

on the radio itself, or u tapped the rear speakers?

 

[bpres9991 10+ year member]

Radio itself

 

[southwest713 10+ year member]

might have just left something unplugged or accidentally pulled out a wire. does the radio not turn on at all, or just no sound?

 

[bpres9991 10+ year member]

It doesn't turn on at all. Maybe its possible a wire came out of the plug. Also, the keyless entry stopped working unless the key was in the ignition, so that was messed up also after I installed the kickdown

 

[southwest713 10+ year member]

yea sounds like a wiring issue. might just need to double check everything behind the unit. test the wires at the H/U and make sure ur getting a constant, and then the accessory. probly just something came loose