input?

  • 2
    Participant count
  • Participant list
If your head unit has rca outputs you can use the low-input connectors on the amp. But if your head unit only has speaker leads coming out of it, you have to use the hi-input wires unless you get a rca convertor(not sure of the name of the thing!) that you connect to your h u wires and run the lo inputs off of the amp to the rca plugs. Most newer aftermarket radios have rca outputs though so i'd go with that. Hope i helped!//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Actually the pods do not impact the sound of tweeters at all, it's all about location, reflections and pods while great in some locations, can be...
6
247
Use two sets of RCAs. One set for the Front channels and the other for Sub Output and into Rear Input on the amp. Turn off the Rear Filter on the...
5
653
I would prob go and take it to a shop to someone that knows how to install, pay the $50-75-100 bucks so its done correctly.If you continue to do...
1
1K
The ZVX 8 doesn’t do well sealed. 1.25 cubes ported 35-38 HZ is what it will like. Very inefficient 8 and wasn’t very impressive to me, even in a...
3
2K

About this thread

scottee

Junior Member
Thread starter
scottee
Joined
Location
new zealand
Start date
Participants
Who Replied
Replies
1
Views
816
Last reply date
Last reply from
gator4thehaters
1000007975.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0
1000007974.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0

New threads

Top