Info For An Old Amp I Found???

[revrider1 5,000+ posts]

First off, i know its a POS amp. Its a Jensen ALX2000 about 8 years old, all I need to know is if its bridgable at 4ohms? I have looked everywhere and came up empty handed. Thanks in advance for any help...

Click to read more...

 

[revrider1 5,000+ posts]

ok, no one then? I figured, lol...

 

[audioarsonal 10+ year member]

4 ohms should be alright.If not the amp will let you know!

 

[revrider1 5,000+ posts]

I just found some info, it says by bridged it means per channel which means its 2ohm stable per channel. Im looking to find out if it bridgable at 4ohms. IDK....

 

[blazeplacid 10+ year member]

im about 90% sure you can bridge that amp @ 4 ohm with no problems

 

[revrider1 5,000+ posts]

Im almost sure also, but it aint labeled on the amp and would know what terminlas to use for bridged mode?

 

[audioarsonal 10+ year member]

That is 2 ohm STEREO stable so 4 ohm MONO will be alright.

 

[JL Audio 5,000+ posts]

100 X 2 @ 2 ohm stereo

50 X 2 @4 ohm stereo

probably not bridgeble at 2 ohm or 4 ohm

most people who've used it say they get around 40 per instead of 50 watts.

Link to one with serials etc:

http://cgi.ebay.com/ebaymotors/Jensen-ALX2000-Stereo-Amplifier-100WX2-Mosfet-Power_W0QQitemZ250180879393QQcmdZViewItem

 

[audioarsonal 10+ year member]

If it will do 2 ohm stereo it will defintily do 4 ohm bridged mono.

 

[JL Audio 5,000+ posts]

If it will do 2 ohm stereo it will defintily do 4 ohm bridged mono.

just info i've found and copied.. supposed I should have read it more.. :/.

 

[audioarsonal 10+ year member]

no prob just making sure OP knew.

 

[revrider1 5,000+ posts]

Ok, but what terminals to use for 4ohms bridged?

 

[SocMunky 10+ year member]

Are positive and negative labeled on the amp anywhere? If so I'd imagine you have about a 50/50 shot......positive from one side, neg from the other.

 

[revrider1 5,000+ posts]

Are positive and negative labeled on the amp anywhere? If so I'd imagine you have about a 50/50 shot......positive from one side, neg from the other.

Yeah, ima try it later. If i kill it oh well. I know its a crap amp. Its new though and would really like to keep it for emergency use.

 

[ThatChevyGuy 5,000+ posts]

i sold one on here a little while back, it does more than 200 watts, btw. And yes, 2 ohms per channel or 4 bridged.