ID CTX65cs & MTX Blue Thunder Pro 752 ?

[dredey 10+ year member]

i plan on gettin ctx ids

# RMS Power Handling: 100 Watts

# Peak Power Handling: 200 Watts

# Frequency Response: +/- 3 db 58hz-22khz

# Efficiency @ 2.83 volts: 93dB

# Impedance: 4 Ohms

# Mounting Depth: 2.75

# Poly-mica cone with butyl rubber surround

so i got a MTX Blue Thunder Pro 752

RMS Power measured at 12.5 Volts DC:

2 x 37.5W @ 4 ohms (

2 x 75W @ 2 ohms (

1 x 150W @ 4 ohms bridged (

Dynamic Power (IHF-202 standard) measured at 14.4 Volts DC:

90 watts x 2 into a 4 ohm load

165 watts x 2 into a 2 ohm load

325 watts bridged into a 4 ohm load

So if i hook up both speakers to 2 ohm i will only get 75 watts to each speaker when they can take about 150, so im underpowering them right?

and how do i hook it up to 2X4ohms if i only got 2 R and 2L speaker connections on the amp

also how do i get the 165 watts X2 outta the MTX , that would power the ctx perfectly wouldnt they?

thanks for any answers yall can give me

Click to read more...

 

[dredey 10+ year member]

anybody?

 

[02xblazer 10+ year member]

u cant get 165w rms out of them, that was peak power.. if u want 165w rms u need a different amp

 

[02xblazer 10+ year member]

those are the comps im wanting, probly gunna get a kicker zx450.2 to power them

 

[dredey 10+ year member]

so i should get the kickers to power them better than the mtx? good think i only paid 40 bucks for it lol