I need some questions anwered quick!

[JuicyJeff 10+ year member]

needed help. got none

Click to read more...

 

[JuicyJeff 10+ year member]

so i tuned it with the ac voltage up to 30v which is 900 watts, giving each sub 450rms. The songs that used to bang no longer do, I maxed it out on 6 foot 7 foot which used to be a banger, now sounds like a thud //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif. Subsonic is at 30 and lpf is 80ish, estimation is hard when the dial goes from 20 to 300. I put 6 foot 7 foot all the way up and got 20v at a max, thats only about 400 watts. That song is 320kbs. is there a way to get lpf spot on other than estimation?

Btw, I used a 50hz 0 db tone

 

[JuicyJeff 10+ year member]

No input?

 

[JuicyJeff 10+ year member]

50 views no comments. If it ain't broke don't fix it. It was tuned nice before I went ahead of myself, had a put on my song with the most bass and just checked the wc voltage rather than dc like an idiot I woulda known if ot was good before I did anything. I have it tuned to 30.5 volts from a 50hz sine with lpf around 80 sand ssf at 30ish. I wonder what changed. Only thing I can think of is my 8g wire didn't eant to go into the terminal on the box this time and I just kinda jammed it in there and screwed it down.

I am curious tho as to why I'm getting a readout of 2 ohms before I subtract .4 resistance

 

[JuicyJeff 10+ year member]

Still need help guys!

 

[JuicyJeff 10+ year member]

I know somebody here can help me with this!

 

[JuicyJeff 10+ year member]

Tops

 

[bryansong 10+ year member]

Maybe one of your daisy chain jumper coil to coil is open (bad connection) and you are just reading one coil. Can you pull the sub and measure at the terminals?

 

[wickedwitt 10+ year member]

0 or -3db and 40hz if you are going to go higher than 3 on your boost, and are listening to music. Higher only if you will be burping higher than say 50hz pretty regular

 

[JuicyJeff 10+ year member]

I can't find -3 she test tones anywhere. Idk why I can't get them to sound the same. All I tocuhed was the wires on the back of the box at the terminal. The 8g is shoved in kind of sloppy, but it shouldn't matter really...

 

[JuicyJeff 10+ year member]

My box is 1.73 sqft tuned to 34hz. I'm wondering of that's too big . And when I tune should I tunr with ssf and lpf down then turn them up to wherebthey should be, or set them first and then the gain... it'd make a huge difference if it was gain and then lpf

 

[JuicyJeff 10+ year member]

any ideas?