I need help choosing some subs

[el_miguelio]

i dont know what subs to get plz help

(2) Pioneer TS-W3001D2

Features:

Woofer Cone Material: Interlaced Carbon Fiber/Glass Fiber Reinforced

Surround: Wide-Roll, 3-Layer Fiber Woven Ar amid Radial with Honeycomb Cloth

Voice Coil: Dual 4-Layer, Long Voice Coil

Voice Coil Wire: Copper

Voice Coil Bobbin: Phenol Resin Coated Glass Cloth

Projected Pole Yoke with Vented Pole

Magnet Construction: Double Stacked (110oz)

Basket Design: Aluminum Die-Cast Rigid Chassis

Gasket: 1-Piece Rubber

Wire Terminals: Integrated Single-Sided Silver Compression Terminals

Specifications:

Watts MAX. Music Power: 3000 Watts

Watts Nominal Power Handling: 1000 Watts

Frequency Response: 18 Hz to 700 Hz

Sensitivity: 89 dB

Ohm Rating: 2 ohm or 4 ohm

Recommended Enclosure: 0.50 ~ 1.0 Cubic Feet

(2) 15" Solo-Baric L7 Series Subwoofer

Max Power Handling: 2000 Watts

RMS Power Handling: 1000 Watts

High-temp Dual 2 Ohms voice coil (428 Fahrenheit)

Frequency response: 18-100 Hz

Sensitivity: 89.4 dB

Titanium deposit impregnated cone woofer with rolled outer edge

Santoprene rubber surround

Full coverage back bracing

Poly-cotton semi-progressive spider

Spiralead tinsel-lead technology

Highly-efficient UniPlate pole-piece/back plate

Heat-reducing T-cut top plate

Solid pole piece

Cast-aluminum basket

Spring loaded terminals

Solokon 1 piece cone

SoloKon for strength and accuracy

T cut top plate for high magnetic field strength

Aluminum coil former (same as SoloX)

Pole venting at cone brace

Stitched and glued tinsel leads enable high excursion

Ribbed Santoprene surround

One Piece Ultra Rigid Molded SoloKon with 360 Degrees Back Bracing

(1)18" Dual 4 Ohm Solo X Series Competition Subwoofer

Power Handling:

Peak: 10000 watts

RMS: 5000 watts

Impedance: Dual 4 ohm

SoloKon injection molded polypropylene with spoke design cone woofer

Stitched rubber surround

Cast-aluminum basket

Massive motor assembly

UniPlate V.2™ hyper-extended, pole/backplate assembly stays cooler with X-Vent™ technology (pat.pend.), yielding enhanced heat transfer for maximum power handling

S4 Quad Spider Array with perimeter cooling for improved air circulation

ARCTIC (Aluminum Rapid Cooling Thermal Induction Centering) Cap™ allows for even greater heat dissipation

Removable spring-loaded binding posts

3.5" Copper-clad-aluminum, edge-wound dual 4 ohms voice coil

Enormous magnet structure (approximately 100 pounds)

Frequency response: 18-100 Hz

Sensitivity: 90 dB

(1)JBL W12GTi-MkII 12" DVC

12" Dual 6 Ohm GTI Competition Level Subwoofer

Power Handling:

Peak: 4000 watts

RMS: 700 watts

Impedance: Dual 6 ohm

Kevlar paper cone woofer

Nitrile-butylene surround

Differential Drive® Design motor

Symmetrical field geometry ensure linear cone travel and low distortion

3" Voice coil

Frequency response: 18-1000 Hz

Sensitivity: 91 dB

(2) Memphis 15-MC124 12"

RMS Power Handling: 200 watts

Peak Power Handling: 400 watts

Double roll polyprene surround: Better control over cone movement

Ribbed polypropylene graphite cone

Dual flat spiders with graduated rolls

Single 4-ohm voice coil

4-layer winding on 2" Kapton® former

Vented basket and vented spider spacer

Aluminum heatsink

Sensitivity: 88 dB

Magnet Size: 50 oz.

Mounting Depth: 5.5"

I GOT THE 2 MEMPHIS AND THE 2 PIONEER SHOULD I SATY WITH ONE OF THEM OR SHOULD I BUY ONE OF THE OTHER ONES i want to be heard from blocks away but i need to know wat subs are better and louder

Click to read more...

 

[ozzy87 10+ year member]

amp?

 

[Ryan shaw 10+ year member]

You have a lot of research you need to do before you want to be heard from blocks away. I am 90% sure none of those subs you listed up there will do that, except for the solo x but i know you can't power it. Do some research on here and other places before blowing money on crappy equipment.

 

[Phoenix Risen 10+ year member]

those options are kind of all over the place.

what are your goals, how much space do you have to work with, how much power are you wanting to run and, how much do you want to spend

 

[subzero 5,000+ posts]

? you listed all that ish.... but forgot to list the car and the other gear... more needed thatn all that ish... Caraudio.com members most likely know those model's #...

 

[el_miguelio]

i have a Soundstream VIR-8310NRBT for my dash

i have a 1998 trans am convertible

i need the subs and the amp

i want to sepend 400 on the amp

and like 500 on the subs

 

[wickedwitt 10+ year member]

You don't have room for the Solo X (or what it takes to run 4k daily), try the L7s if you can spend 400 on an amp you should be able to power them decently and build a good enclosure.

 

[E-strings 10+ year member]

The Memphis 12s hit hard in the right box with the right amp. I have 2 of the prs and people say they hear me coming a pretty good distance away and Im using a exonic 3000dx @ 4 ohms turned to about the third or fourth notch and it pounds like crazy. My friend has two of the pioneers and mine are much louder. The solo x is loud but cmon its a bit impractical unless your going straight comp.

 

[crgroven 10+ year member]

you have done alot of research but you should also look at subs that are not in your area and a good one to look at would be audioque, incriminator audio and maybe even vibe audio or orion, with your car being a converable you should look at subs that take a small amount of space, the power doesnt really matter much as long as you have the right encloser

 

[09civic 5,000+ posts]

no.