I need help, and I need help fast with a Line Output Adapter.

[cory551 10+ year member]

Today, i'm taking apart my Trailblazer's dashboard to install my new amp/subs. I'm really new to this, i've never even done an install before.

Anyway, after I take off the dash and get to the factory stereo, how do I hook it up?

I'm really new, and I don't have the instructions for it, so a little help for be great, anything.

This is it right here:

Click to read more...

 

[cory551 10+ year member]

uh, bump?

 

[DeViOuSoNe 10+ year member]

You hook 2 speakers to it? Positive to positive, and neg to neg? And plug Rca's Into it.

Just find the 2 front or rear speaker's wire. and tap into that. Then use one speaker on the right and one on the left side. Plug rca's in and you done.

 

[Imperial GOD 10+ year member]

I'll try to help yah.... I'm not an expert this is just what I had to do in my car before I got a HU with sub out....

If you have the Line output converter you have to kind of strip the speaker wire and tap into it. this should be fairly easy. then hook the converter to it. It'll pull the juice off of your speaker wires, and then push it into your AMP..... Does this make sense?

 

[Firmbiz94 10+ year member]

find the color chart of your particular truck..you are goin to want to tap into the REAR speakers.... pos and neg... its pretty easy ..i did it in my car in 20 minutes... get a wire stripper some buttconnectors and your set...cut the speaker wire you are goin to tap and connect the wire from the back of the radio to your LOC wire and crimp th em..then crimp the other end with the wire coming from the radio harness...