Sold i need an amp!!!

[FalconXtreme 10+ year member]

hey im gonna be gettin 2 k's soon. so im gonna need an amp. its gotta put out atleast 600rms at 1,2,4 ohms. if anyone has an avionixx 800.2 that would be sweet...gimme!! thanks

Click to read more...

 

[slipknot87420 10+ year member]

I have an RF 500a2 circa '99 that does 700-800 rms @ 4ohm excellent condition give me an offer

 

[FalconXtreme 10+ year member]

got any pics? what types of features does it have(crossovers ssf's etc.)? thanks

 

[djjdnap 10+ year member]

got a jbl 1200.1

has a few minor scratches, but it works just fine

210shipped

 

[limitkid7 5,000+ posts]

u couldddddddddddd use my amp

hifoniocs z6400 round 200bucks

340x2 @4ohms, has ssf/ bass boost/ bass remote

 

[FalconXtreme 10+ year member]

hey what could i bride that hifoniocs 2?? and do both of u have pics?(dj, pics of the scratches??) thanks

 

[slipknot87420 10+ year member]

I don't have Pics but i do have a couple refs from this site, It has minor scratches but nothing serious, here are the specs Dynamic Power Rating (IHF-202 Standard) - Measured at 14.4 Volts

Mono into a 4W Load - 710 Watts x 1

Per channel into a 2W Load - 330 Watts x 2

Per channel into a 4W Load - 210 Watts x 2

Signal-to-Noise Ratio > 100dB A-weighted

Crossover Slope 12dB/octave Butterworth

Crossover Frequency 50Hz – 210Hz

Frequency Response 20Hz to 20kHz ±0.5dB

Bandwidth 10Hz to 200kHz ±3dB

Damping Factor @ 4W (at output connector) >200

Slew Rate 30 Volts ms

IM Distortion (IHF)

Source Unit Compatibility (+15dB gain overlap) 17V max. (low level in)

Input Sensitivity (+0dB gain overlap) Variable from 250mV to 4V (low level in)

Variable from 650mV to 11V (high level in)

Protection NOMAD - Internal analog-computer output protection circuitry limits power in case of

overload. Thermal switch shuts down the amplifier in case of overheating.

Suggested Retail $500.00 here is a pic of what it looks like

 

[limitkid7 5,000+ posts]

hey what could i bride that hifoniocs 2?? and do both of u have pics?(dj, pics of the scratches??) thanks

4ohms bridged is 350watts x2 @ a 4ohm load..

go see my gallery and u'll see it

 

[phil7468 10+ year member]

i have a brand new 1001 bd the birth sheet says it does 1075 watts rms @ 2ohms. i'll take $250 shipped

 

[97dakota 10+ year member]

hifonics z1000d 1000 at 1

let nme know

 

[limitkid7 5,000+ posts]

price adjustment 185 bucks shipped next day air

 

[FalconXtreme 10+ year member]

well im not sure at this point but i might be getting 2 se's so im gonna need a 1200watt amp. im not sure yet so im not gonna make any decisions.

 

[bumpin_8605 10+ year member]

i have a brand new never been used profile clarius 1200 that i will sell for 225 shipped

 

[djjdnap 10+ year member]

lol, u guys are all overpriced jeez...//content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

 

[limitkid7 5,000+ posts]

lol, u guys are all overpriced jeez...//content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

obv. u didn't read the sticky at the beg. of this forum.. ur dumbas$ can keep ur comments like that to yourself.. PUNK B!TCH