Reply to thread

Message

<blockquote data-quote="slipknot87420" data-source="post: 297112" data-attributes="member: 543958">I don&#039;t have Pics but i do have a couple refs from this site, It has minor scratches but nothing serious, here are the specs Dynamic Power Rating (IHF-202 Standard) - Measured at 14.4 VoltsMono into a 4W Load - 710 Watts x 1Per channel into a 2W Load - 330 Watts x 2Per channel into a 4W Load - 210 Watts x 2Signal-to-Noise Ratio &amp;gt; 100dB A-weightedCrossover Slope 12dB/octave ButterworthCrossover Frequency 50Hz – 210HzFrequency Response 20Hz to 20kHz ±0.5dBBandwidth 10Hz to 200kHz ±3dBDamping Factor @ 4W (at output connector) &amp;gt;200Slew Rate 30 Volts msIM Distortion (IHF)Source Unit Compatibility (+15dB gain overlap) 17V max. (low level in)Input Sensitivity (+0dB gain overlap) Variable from 250mV to 4V (low level in)Variable from 650mV to 11V (high level in)Protection NOMAD - Internal analog-computer output protection circuitry limits power in case ofoverload. Thermal switch shuts down the amplifier in case of overheating.Suggested Retail $500.00&nbsp; here is a pic of what it looks like</blockquote>

[QUOTE="slipknot87420, post: 297112, member: 543958"] I don't have Pics but i do have a couple refs from this site, It has minor scratches but nothing serious, here are the specs [B]Dynamic Power Rating[/B] (IHF-202 Standard) - Measured at 14.4 Volts Mono into a 4W Load - 710 Watts x 1 Per channel into a 2W Load - 330 Watts x 2 Per channel into a 4W Load - 210 Watts x 2 Signal-to-Noise Ratio > 100dB A-weighted Crossover Slope 12dB/octave Butterworth Crossover Frequency 50Hz – 210Hz Frequency Response 20Hz to 20kHz ±0.5dB Bandwidth 10Hz to 200kHz ±3dB Damping Factor @ 4W (at output connector) >200 Slew Rate 30 Volts ms IM Distortion (IHF) Source Unit Compatibility (+15dB gain overlap) 17V max. (low level in) Input Sensitivity (+0dB gain overlap) Variable from 250mV to 4V (low level in) Variable from 650mV to 11V (high level in) Protection NOMAD - Internal analog-computer output protection circuitry limits power in case of overload. Thermal switch shuts down the amplifier in case of overheating. Suggested Retail $500.00 here is a pic of what it looks like [/QUOTE]

Verification