I need 4 Cubes Under 13.5" Tall....Can Anyone Help?

[FadedSpy 10+ year member]

So I built a 4 cube slot ported box tuned to 32 hz just to learn it wouldn't fit in my trunk //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif This was the box I built...

So now that it won't fit I need to build a box that can slide through the back seat and clear the rear deck. The box can be no taller than 13.25" tall and no wider than 36" and no deeper than 36". I would like it tuned to 32 hz. I believe I will be using Two American Bass XFL 1244's on a Brutus BRZ 2400.1D. The amp is being repaired right now (hopefully) Once I get it back I'll purchase the subs.

In the meanwhile I can get started on another box, the first one was good practice for me, and my friend enjoyed "upgrading" his sub box at my cost but whatever. At least someone could use it.

So, If anyone can help me figure out how to pull this off it would be greatly appreciated!!!!!

Thanks in advance guys! //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

Click to read more...

 

[Silverado SS 10+ year member]

Disassemble box and reassemble in trunk with aluminium angle or just lessen the height and extend the depth

 

[fatboytyler]

13.25" tall is going to be tough when you add in 2 sheets of 3/4" MDF. However, I wish you the best of luck!

 

[FadedSpy 10+ year member]

I can build a box that's 13.5" x 36" x 36" but I have no idea how to make a port tuned to 32hz?!?

 

[FadedSpy 10+ year member]

 

[FadedSpy 10+ year member]

Complete...







 

---------- Post added at 07:04 PM ---------- Previous post was at 07:03 PM ----------

 

Well, almost complete. I still have to caulk the top inside of the box