How to tune my Hifonics

[Tyler Lee 10+ year member]

I have a bxi 1508d mono block hifonics amp.. It's hooked up to a one ohm load to 2 800 RMS peak power Pioneer 10's.. But I was wondering how exactly do I tune it.. Each sub has about .10 Cubic feet of space.. And I got a 1.5 inch port for each sub.. So if u have any ideas please leave a comment.. Thanks

Click to read more...

 

[subzero 5,000+ posts]

set the lowpass filter at 80 or so. and if it has a subsonic filter, set that at 30hz. Turn off all bass boost..

 

[Rodek 10+ year member]

.10 Cu ft of air space? I would start with a larger enclosure.

 

[kr15 5,000+ posts]

.10 Cu ft of air space? I would start with a larger enclosure.

this

i have this same amp, and it should push your subs pretty good

 

[Vossy 10+ year member]

How do those even fit in .1 cubes?

 

[Tyler Lee 10+ year member]

Haha sorry that was suppose to be .70 cubic feet and so Iturn my bass boost all the way off

 

[VWBobby 10+ year member]

Tune it until it sounds best. All installs, all equipment will sound different. If you set your subsonic up around 30hz how are you supposed to get the super low tones? I set mine at 0-20hz. Otherwise LPF, etc will come down to a matter of preference unless you tuning for SPL.