-
5Participant count
-
Participant list
Popwarhomie 5,000+ posts
Team Lethal Pressure
A 2nd for ferrules.
You can use insulated or uninsulated with heat shrink. There’s a tool for crimping the smaller ones but you won’t need that for connecting to the amp, the set screws will deform them nicely to the shape of the terminal.
Teansic 460Pcs Wire Ferrules AWG (16 14 12 10 6 4 2 1/0) Tinned Copper Crimp Connector Electrical Cable Pin Cord End Terminal 8 Sizes Assortment Kit: Amazon.com: Industrial & Scientific
Teansic 460Pcs Wire Ferrules AWG (16 14 12 10 6 4 2 1/0) Tinned Copper Crimp Connector Electrical Cable Pin Cord End Terminal 8 Sizes Assortment Kit: Amazon.com: Industrial & Scientific
You can use insulated or uninsulated with heat shrink. There’s a tool for crimping the smaller ones but you won’t need that for connecting to the amp, the set screws will deform them nicely to the shape of the terminal.
Activity
No one is currently typing a reply...
Similar threads
You can pull that amplifier and take to an Audio shop and see if they will test it. Most shops charge very little and some will not even charge...
Repair it or Sell it for parts.
Go 150 Watts speakers or equal to your amps. 150 watts and up is your amps. That's the good rule of thumb.
- Started by Infidel305
- Speakers
The best thing you can do is make a solid plan. This way you won't be spending money twice and having to keep going back in add or replace parts.
- Started by mousepad123
- Wiring, Electrical & Installation 2
I ran 1200 watts through 12 gauge. Didn't notice any melting on the wire's insulation.
- Started by Aryan
- Wiring, Electrical & Installation
About this thread
Latest topics
-
-
-
-
-
where to connect the Pioneers yellow mute wire?
- Started by HandsomeSteve
- Replies: 3