how fast is your car

What car ^ ? 1/4 is just like Z33 and SRT-4 but the skidpad is no where to be called a Z33.
The car im My Avatar //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif 2004 GTO

Oh ya and the Z33 is .1 seconds slower in 0-60 and .3 slower in 1/4 :p but skidpad is a bit better at .89g

 
i maintain that those are both manifolds
I see your point, but in all reality, still one is a manifold, a casted piece of either steel or aluminum, and headers are man made out of tubing, that needs to be welded and built for each application.

 
why would you wanna go fast?! none of the fly hunnies can see who is driving!!!

i personally prefer will smith's philosophy: "2 mph, so everybody sees me"

;-)

0-60 in... too long

 
I see your point, but in all reality, still one is a manifold, a casted piece of either steel or aluminum, and headers are man made out of tubing, that needs to be welded and built for each application.


damn your knowledge

 
I see your point, but in all reality, still one is a manifold, a casted piece of either steel or aluminum, and headers are man made out of tubing, that needs to be welded and built for each application.
When you can't get at your **** spark plugs with anything short of an act of god - you have headers.

That's my definition anyway. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
When you can't get at your **** spark plugs with anything short of an act of god - you have headers.
That's my definition anyway. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
haha //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 
to me a FAST street car runs 10's. i'd say mine is quick, it runs mid 12's on street tires and motor, low 11's on slicks and 150 shot. i dont use the spray on the street though.

 
0-60 mph: 5.3 sec 0-100 mph: 12.9 sec

Quarter Mile: 13.8 sec @ 103.8 mph

Skidpad: .81g

Top Speed: 160 mph

Braking, 60-0 mph: 132 ft

Slalom Speed: 63.4 mph
according to those times, it takes your ls1 .9 seconds to accelerate from 100 to 103.8?

 
When you can't get at your **** spark plugs with anything short of an act of god - you have headers.
That's my definition anyway. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif
so I can see you definitely have had headers. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
according to those times, it takes your ls1 .9 seconds to accelerate from 100 to 103.8?
That would be correct. These are manufacturers numbers. Once you get past 100 the rate of acceleration drops sharply for most any car. Take the SRT-4 for example which has close numbers to the GTO.

0-60 mph: 5.3 sec

0-100 mph: 13.4 sec

Quarter Mile: 13.9 sec @ 103 mph

Skidpad: .86g

Top Speed: 153 mph

Its rate of acceleration is a bit more than mine after 100 but you can still sees it's struggling at this point. It also takes a bit longer to get to 100 than mine though, but still finishes the 1/4 in the nearly same time.

Now a mucielago is a bit better after 100 than both me and the SRT-4 and gets to 100 a hell of a lot quicker lol //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

0-60 mph: 3.6 sec

0-100 mph: 8.7 sec

Quarter Mile: 12 sec @ 121 mph

It is still accelerating at a rate of 6.36MPH each second after hitting 100 Where my car is only accelerating at 4.222 MPH each second after hitting 100

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

For awhile I was running 80ah yinlong on a stock 100-120a alt. Smart 5 sub amp and Audison APF8.9 bit stage amp. My voltage never dropped more...
4
2K
Yeah, I plan to run them in my workshop. I haven't gone through them or anything but they startup and run just fine. I don't see any strange spike...
8
2K
I agree with every one above. OFC is much better. Copper is a much better conductor than aluminum.
6
344

About this thread

assassyn

10+ year member
CarAudio.com Elite
Thread starter
assassyn
Joined
Location
Michigan
Start date
Participants
Who Replied
Replies
269
Views
10,846
Last reply date
Last reply from
IamDeMan
1715565471722.png

Doxquzme

    May 12, 2024
  • 0
  • 0
IMG_5880.jpeg

Brendon Jenness

    May 11, 2024
  • 0
  • 0

New threads

Top