How do YOU secure your box?

[blacksatsc2 10+ year member]

Well like the thread says. How do you keep your box from moving around in the trunk. I just have a single JL 12w3 in a sealed enclosure, and it moves all over the place. So please post what you do to keep it tight.

Click to read more...

 

[mtlhead 10+ year member]

lol well i usually had problems like this too..until just recently

i took 3 pieces of 1/8" steel and cut them so they would be an appropriate length. Attached one behind each seat (where it locks in place) and one to a metal bolt underneath the carpet...hasnt moved an inch since

 

[Megalomaniac 5,000+ posts]

i used plumbers strap

 

[XaznKewLguyX 10+ year member]

L brackets?

 

[Audio Master 10+ year member]

chastity belt works for mine but sometimes she wriggles out of it!

 

[outspoken 10+ year member]

4 L brackets and 1" self tapping screws... (watch out for the gas tank, mine was a lil' close)

 

[CrazedCat 10+ year member]

carchick has a CHASTITY belt.

 

[billabongcr 5,000+ posts]

its ontop of my backseat with my seats back against it. holds in place perfectly

 

[THUMPPER 10+ year member]

I always bolt my enclosures right to the floor

either bolts thru the bottom of the box with

big washers on the bolts or I build a brackets

out of angle Iron ..one for each side and bolt

it down...

I welded big flat wing bolts to the floor on my last

install and used big 3/8 allan head bolts to bolt

all 4 corners (angle iron brackets) down

if I can find a pic I'll post it

 

[CarChick]

Crazed Cat has a plumber's strap..on

//content.invisioncic.com/y282845/emoticons/moon.gif.9d317aec3339ffe7fde0638df52c628a.gif

 

[Audio Master 10+ year member]

its almost like saying have a go isnt it CHAS TITY BELT (CHASE TITY)

lol hahahahahahahaha

 

[Audio Master 10+ year member]

no offence carchick im sure you dont have a chastity belt im sure you dont need it as a lady of ***.

i mean class sorry lol

 

[tremor1127 10+ year member]

put a false mdf floor back there and cut out a spot for your box to "drop" into. cover it in the same material as the box...

 

[tremor1127 10+ year member]

easy to do with suv, prolly hard in trunk car, sorry...

 

[THUMPPER 10+ year member]

here are the brackets for my last install

the angle Iron went 1/2 way up the rear of the enclosure

and the enclosure sat in it like rails..each corner had a 2"

tab off the end bolted to the floor...

I could lock up the brakes and not have to worry about wearing it

I know it's phsyco looking...the guys at Car Tunes and Toys nick named

it Frankenports....