high powered plate amps

[adio 5,000+ posts]

wtf you gunna run a btl in your house?

na!! i was thinking of a 18 sealed, i was also reading of FI possibly making a 22" sub over at avs and hometheatershack

 

[andrewmoore13 10+ year member]

Just get a couple computer power supplies and wire the yellow and black wires to the positive and negative terminals on a car audio amp.

Much cheaper IMO.

 

[adio 5,000+ posts]

Just get a couple computer power supplies and wire the yellow and black wires to the positive and negative terminals on a car audio amp.
Much cheaper IMO.

more info??//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[DidUHearThat? 10+ year member]

Crown XTI amps

Clean, under rated. Full DSP processing including bass managment, eq, limiting and crossover control. Computer USB programable/controllable.

1400 watts @ 4 ohms (mono brideged)

$339

http://www.audiolines.com/product.php?productid=17231

2000 watts @4ohms

$500

http://www.audiolines.com/product.php?productid=17231

3200 watts @ 4 ohms

$800

http://www.audiolines.com/product.php?productid=16283&cat=1023&page=4

 

[Pop da Hatch 10+ year member]

^^ Word ^^

 

[bball09124 10+ year member]

Just get a couple computer power supplies and wire the yellow and black wires to the positive and negative terminals on a car audio amp.
Much cheaper IMO.

Much ghetto-er too.

Just buy some Behringer EP-2500s and call it a day.

 

[DidUHearThat? 10+ year member]

Crown IT series.

8000 watts

$2999

http://www.audiolines.com/product.php?productid=21647&cat=1023&page=4

Crown MA1200

6,000 watts per channel, dual 2 ohm (12,000 watts total)

$6,855

http://www.audiolines.com/product.php?productid=22500&cat=1023&page=11

 

[adio 5,000+ posts]

Crown XTI amps
Clean, under rated. Full DSP processing including bass managment, eq, limiting and crossover control. Computer USB programable/controllable.

1400 watts @ 4 ohms (mono brideged)

$339

http://www.audiolines.com/product.php?productid=17231

2000 watts @4ohms

$500

http://www.audiolines.com/product.php?productid=17231

3200 watts @ 4 ohms

$800

http://www.audiolines.com/product.php?productid=16283&cat=1023&page=4

do these have a high pass filter on them?

 

[JrVtecAccord 10+ year member]

The Crown's are nice, I've run QSC amps in my HT which I liked. The only thing I hated running 4 QSC rack amps was that they produced a lot of heat. Amps with a 50" plasma equals extra cooling in media room.

 

[andrewmoore13 10+ year member]

more info??//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

All you need is a couple computer Power Supplies. Cut the funky colored wires. You have to connect a green one to a ground... (i think its green) this makes it think it's connected to a mother board.

After you do that all you do is match the yellow to + and the black to -.

For the remote just put a wire from the positive to the remote on terminal.

I did that for a HT setup I had running. Had a JBL GTO 752 and a JBL PX600.2 running a set of comps and a TREO TSX 12.22. Thing was FAWKING loud.

 

[andrewmoore13 10+ year member]

Much ghetto-er too.
Just buy some Behringer EP-2500s and call it a day.

Sorry for double post, but its not ghetto if you build a little amp rack to display the amp. And then a couple boxes for the comps. Check my little system.

By andrewmoore13 at 2008-10-06

By andrewmoore13 at 2009-04-14

Thing bumped loud as hell. Off only 2 power supplies. 1 per amp.

Also had it running off a 9887 for awhile.

Going for a X001 for a HU this time around. Gonna build a box for the HU, amps and PSU's this summer. Its gonna look pretty sexy.

 

[DidUHearThat? 10+ year member]

do these have a high pass filter on them?

"Full DSP processing including bass managment, eq, limiting and crossover control. Computer USB programable/controllable."

 

[AVSTANG02]

2400 watt plate amp with Highpass!?

you're going to be deaf by the end of the week.

 

[DidUHearThat? 10+ year member]

Sorry for double post, but its not ghetto if you build a little amp rack to display the amp. And then a couple boxes for the comps. Check my little system.

Thing bumped loud as hell. Off only 2 power supplies. 1 per amp.

Also had it running off a 9887 for awhile.

Going for a X001 for a HU this time around. Gonna build a box for the HU, amps and PSU's this summer. Its gonna look pretty sexy.

If by "sexy" you mean ghetto, then yes. Very ghetto.

 

[andrewmoore13 10+ year member]

If by "sexy" you mean ghetto, then yes. Very ghetto.

I don't think my HT looks bad by any means. I actually get a lot of compliments from people when they came over for parties.