Hi First Time poster. Question on Amps

[MrFordRanger]

Hello, I need some help figuring out what amp(s) I need to support my current setup.

This is my Current Setup. TOTAL of 3 Subs.

SONY SUBS X 2

Manufacturer Part Number XSGTX121LS

Manufacturer Sony Corporation

Product Model XS-GTX120LS

Product Name Xplod XS-GTX120LS Woofer

Impedance 4 Ohm

Driver Type 12" Polypropylene Woofer

Minimum Frequency Response 42 Hz

Maximum Frequency Response 1 kHz

RMS Output Power 300 W

PMPO Output Power 1000 W

PIONEER SUB X 1

RMS Output Power: 300 W

PMPO Output Power: 1300 W

Driver Type: 12" Polypropylene Woofer

Minimum Frequency Response: 20 Hz

Maximum Frequency Response: 220 Hz

Impedance: 4 Ohm

Sensitivity: 95 dB

Click to read more...

 

[rlmich]

Are they dvc or svc? Just figure that out so you know how you want to wire them and then pretty much anything that can handle the load that you create will push those without a problem. Its not really a matter of power for these subs, it's a matter of impedance or resistance and making sure the amp you pick is stable for the load you create by wiring them in series or parrellel. Hope that helps. Going forward you might want to figure out what you have for power and then choose subs based on that.