Help!

[jeffs42885 10+ year member]

alright so i got my new box installed and i moutned the amp on the side of it and what happened is i had one of those remote bass gain knob things on the amp and i had it plugged in and then i unplugged it and then the gain was turend up...i turned everything on and it played and then BANG the amp shut off and then there was no bass, i checked the fuse and then I noticed that it was BLOWN..150anl BLOWN to bits. I went to CC and got a 120 amper...went to put it in and the ****ING FUSE BLEW WHILE IT WAS IN MY HAND AND IT BURNED LIKE A *****...

0 GA wire going to a nine.1 feeding a treo ssi dual2 15'' in a 4.5cube box

who can help me?

thanks

jeff

Click to read more...

 

[amedeuce 10+ year member]

Do you have a good ground point?

 

[amedeuce 10+ year member]

was the gain all the way up?

 

[jacko 10+ year member]

why did you get a 120amp fuse after you blew a 150amp fuse? Unless the amp can't even pull 150amps... ?

 

[zachzchw 5,000+ posts]

Dont try to put a fuse in with your power still connected at the battery.

Call ED, they will walk you through your setup.