Help with tuning me 3way crossver

[ngsm13 5,000+ posts]

Jesus H.

nG

 

[Megalomaniac 5,000+ posts]

Help with tuning me 3way crossver
http://us.st11.yimg.com/us.st.yimg.com/I/millionbuy_2000_34139735

http://www.millionbuy.com/pericbm7212.html

I have my mids wired on my 4ch amp on the rear channel and the tweeter wired at the front channel. The xover I have is a PERFORMANCE TEKNIQUE ICBM-7212 3-Way Electronic CROSSOVER.

I have my mids HPF at 80z – LPF at 2.8Khz

I have my tweeters HPF at 2.8Khz but don’t know how to set my lowpass

I what to know what level the dials for each output be set at on the xover, and I need to know if the mids go to the front ch on the xover or the rear….

I need help basically

Thanks guys

sub, mid, tweeter from left to right on them knob sections.

mids = rear (hence the lpf & hpf)

tweets = front (hence only a hpf)

sub = sub (hence only a LPF)

 

[ngsm13 5,000+ posts]

I just don't think he gets it, nor does he actually know what he's doing when he turns these knobs.

nG

 

[UndercoverPunk 5,000+ posts]

Wat? Halp!

 

[xDATx 10+ year member]

sub, mid, tweeter from left to right on them knob sections.

mids = rear (hence the lpf & hpf)

tweets = front (hence only a hpf)

sub = sub (hence only a LPF)

thanks, thats the way i have it set. I got everthing working fine now, what i did notice is when i play them for 5mins or so, it fades in and out...i think i need to make some more rcas for the mids and tweets to goto the xover...i love the gepco wires...thanks again

 

[Megalomaniac 5,000+ posts]

how did your cables turn out, i am curious, you got any photos?

 

[xDATx 10+ year member]

they turned out great, just ordered 50ft to replace my 4ch rcas...i see if i can take some pics after work...=)

 

[Bassballer5 10+ year member]

I answered your bolded question fuckstick.
As far as "I what to know"... I don't know what that means...

nG

him asking how to set the lowpass for his tweeters and you answering with sub crossovers is not "answering your bolded question"