Independence83m
10+ year member
Free Man
i got two 6x9's subs and there 8 ohm 180watts a piece. what kind of amp should i hook these up too?
u mean bridge them or what?i would wire them down so u can use a 4ohm or 2 ohm amp and just run lower power through them... what kinda 6x9's are they?
You would wire them to 2 ohms. They can't go to 4.^i got them in 6x9 boxes, and they sound pretty good but i only have them hooked up to a 200 watt amp and they weren't that loud so i was looking at a 600 watt mono at 2ohms, so i don't if thats too much. its a california amp so i don't know if the ratings are correct and i was guessin it would probably push 250 watts rms at 4 ohms.
He said they were dual 8... If they're SVC @ 8, then well, different advice is needed. Rofl.All right what am I missing here? I thought the OP had a pair of 6x9s that were SVC @ 8 ohms each. If they are indeed the TBs listed in my link, they are SVC8 AND designed for IB use!
If they aren't, then I understand because I am suffering from a sinus infection and the medicine I am on makes me act as if I am drunk. In other words, this could be a case of reading > me.//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif