Help with setting my kicker SX350.2 amp

[s5pitfire 10+ year member]

I got a new batt and alternator so i have to set all the settings, its the kicker amp with the digtal readout thing. anyway. i just want 100% bass in my sub so could u tell me what to set the following to?

slope

gain

hi and lo pass frequency

and anything else i'd need to set. right now i get highs coming out.

thanks in advance.

Click to read more...

 

[s5pitfire 10+ year member]

So no one here can help me?

 

[Decipha 10+ year member]

I got a new batt and alternator so i have to set all the settings, its the kicker amp with the digtal readout thing. anyway. i just want 100% bass in my sub so could u tell me what to set the following to?
slope

gain

hi and lo pass frequency

and anything else i'd need to set. right now i get highs coming out.

thanks in advance.

put the low pass filter as low as it goes which should be around 35 Hz. also it should have an option to select either low pass or hi pass, make sure low pass is active. then set the gain to 1/2-3/4 depending on the subs you have, also if you have hi's coming out the sub then you probably need to turn off the hi pass filter.

Also if your headunit has sub outputs make sure your interconnect cables are connected to them.

 

[Savstyle 10+ year member]

http://www.caraudio.com/vb/showthread.php?t=63933

go there and follow the instructions and do it right the first time, this way u have no worries

 

[s5pitfire 10+ year member]

ok well thanks for the help

my settings are:

Gain->both->12dB

EQ frequency - 32hZ

boostcut - flat

bandwith - 3Qvalve

Lo pass -> 30hz -> 12dB slope

Hi pass -> 10hz -> slope off

Phase -> both

Gain range -> 2V (my head unit is 2.2 volts)

Does that all look good? My sub doesnt sound as good as it used to for some reason, it's a 10 inch kicker comp VR. should I change any of those settings?