- Thread Starter
- #16
externals ended up being 36.5 wide 33 tall 61 depth
bracing is 1 1/4" dowels
top went on
primer
hit 70k miles!!!! wohooo
mounting the subs was an absolute pain in the ***. did it after lifting weights too T_T
very back of the box is roughly 6 inches wide
port size was supposed to be 19x19 but i noticed that the port would cut off the front sections of the box so i had to shrink it down. ended up being 31.5 x 7.5. winisd tells me that's 45 hz tuning. port velocity/vent mach/whatever it's called .04
removable so I can actually tweak with the box instead of having to build a new one if I eff it up.
bracing is 1 1/4" dowels
top went on
primer
hit 70k miles!!!! wohooo
mounting the subs was an absolute pain in the ***. did it after lifting weights too T_T
very back of the box is roughly 6 inches wide
port size was supposed to be 19x19 but i noticed that the port would cut off the front sections of the box so i had to shrink it down. ended up being 31.5 x 7.5. winisd tells me that's 45 hz tuning. port velocity/vent mach/whatever it's called .04
removable so I can actually tweak with the box instead of having to build a new one if I eff it up.
