HELP - Wich is the best option?

[podesteando]

Hi, í´have a Diamond Audio D661 component system and Sub Kicker 05C12, wich amp is the best option? thx

Click to read more...

 

[iceteebone 5,000+ posts]

specs on sub pleas, like coil configuration. i assume you want a 4 channel? have a budget in mind?

 

[podesteando]

Diamond Audio D661s

Power Handling NOM/MAX: 200 watts MAX, 100 watts RMS

Sensitivity (2.83V/1m): 90.6 dB SPL

Freq. Response: 45-22

Type: Component

Kit Includes 2-Midranges, 2-Tweeters and 2-Crossovers

Mounting Depth/Diameter: 2.7 in. / 5.8 in.

Silk Tweeters

Kicker Car Audio 05C12-4

12" subwoofer with high-strength steel basket

Polymineral cone with double-stitched foam surround

Power Handling Watts, Peak (RMS) - 300 (150)

Sensitivity [sPLo], dB @ 1W, 1m - 89.1

Effective Frequency Range, Hz - 27-500

Mounting Depth, in (cm) - 5 3/4 (14.6)

Hole Cut-Out Diameter, in (cm) - 11 1/8 (28.3)

Equivalent Volume [Vas], ft3 (L) - 4.50 (127.65)

Net Displacement, in3 (cc) - 104.9 (1718.6)

Moving Mass [Mms], oz (g) - 4.01 (113.57)

Magnet Weight, oz (kg) - 45 (1.28)

i´thing that Phoenix Gold Octane 5.0:4 is a good option.

Thx

 

[johnson 10+ year member]

Audison VRx 2.150.2 and a VRx 1.500.2

or

2 Helix A2's

 

[iceteebone 5,000+ posts]

still didn't list the coil config but a PG xenon 200.2 would work well. they are stable down to 2 ohms bridged and put out the same power at any ohm load

 

[podesteando]

Phoenix Gold XENON 200.4

variable thermal feedback controlled fans

24dB Linkwitz-Riley low pass and subsonic filter

optimized for any impedance load

Tried and true triple Darlington output stage

Buffered RCA full range thru output

Remote Monitoring Display (RMD) port

Low Pass Level control ready (LPL-44)

200W x 2 (4-1 ohm stereo)

400W x 1 (8-2 ohm bridged)

CEA-2006 approved

Phoenix Gold X100.4

variable thermal feedback controlled fans

24dB Linkwitz-Riley low pass and subsonic filter

optimized for any impedance load

Tried and true triple Darlington output stage

Buffered RCA full range thru output

Remote Monitoring Display (RMD) port

Low Pass Level control ready (LPL-44)

100W x 4 (4-1 ohm stereo)

200W x 2 (8-2 ohm bridged)

or another economic option?? ;-)