Help, one channel lost power

[Hernan 10+ year member]

I run an active setup. Three way components and a sub. I powered the system with two 4 ch amps. The left channel moving the midbass sometimes lost its power. It is still some signal feeding the driver. If the system is restarted, sometimes it began to work normally. Sometimes if I crank up the volume it lost its power. ???

The RCA signal from the stereo is ok, as the misbass shares the same input with the midrange and tweeter and these work ok.//content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

Thanks!

Click to read more...

 

[Wowimzz 10+ year member]

Check your grounds. make sure they are on bare metal.

 

[AllStar1500bd 5,000+ posts]

Check your grounds and make sure your fuses are in there tightly, and you don't have any loose connections anywhere.

 

[azbass 5,000+ posts]

check your grounds again

 

[SAG3 5,000+ posts]

check your grounds 4 times over