help me out on routing power wire!

[blazer316 10+ year member]

I just recently got a 1995 firebird formula with a lt1 and engine and *****. goodies:yumyum:. The problem is i can not find a spot to run a power wire to the interior:crap: can someone help me out? thanks.

Click to read more...

 

[kicker06 10+ year member]

There is probably going to be a firewall gromet behind the pedals or in the same place on the passenger side.

 

[blazer316 10+ year member]

there's not anywhere really that i can find.//content.invisioncic.com/y282845/emoticons/mad.gif.c18f003ab0ef8a0d9c27ca78d77a6392.gif need help:crap:

 

[ebrunn 10+ year member]

time to break out the drill

 

[adam007 10+ year member]

my brothers eclipse was a pain to find, we went to the passenger side floor up at the very top and drilled then ran down the side!! gl

 

[spin dB 10+ year member]

I would concider running conduit under the car and running wire through that, drilling in that particular style of car may be complicated. If you run conduit then you can drill where you want (where you know there is nothing like wires or other things to hit) and bring the wire in where it is needed. This prevents having to hide large gauge wire which will be a problem in that car. just make sure to secure the conduite (PVC or PPVC or insulated steel ) well and that you are away from the exhaust and other things that can interfer with the wire.

 

[evan 10+ year member]

If you have things like interior lights and gauges then there has got to be wiring going through grommets somewhere.

 

[9512ds 5,000+ posts]

i've never looked for a spot on my 95 lt1 f-body, but good luck with the car

 

[bigt 10+ year member]

yea im going to need to figure out how to run 0awg thru my car too, should be fun

 

[blazer316 10+ year member]

I drilled a hole in the drivers side firewall and put a rubber gromet around the hole for now: