Help me choose

[Tek18 10+ year member]

oh then what gauge amp kit should i get lol? the 4 gauge you all linked?

 

[Tek18 10+ year member]

hmmm... ite. just before hand, how hard is it to make a 0 gauge kit fit into a 4 gauge amp... ?

 

[TheUnderFighter 10+ year member]

You should get the 0 gauge kit. And it's not hard at all, you just trim off a bit of the wire.

 

[Tek18 10+ year member]

You should get the 0 gauge kit. And it's not hard at all, you just trim off a bit of the wire.

0 gauge kit is $105

4 Gauge kit is $52, but it comes with a 120A fuse... hmmm.

Honestly, id rather get the $52 so i save $50 on just an amp kit

 

[mclerico83 5,000+ posts]

o guage is 59

 

---------- Post added at 07:56 PM ---------- Previous post was at 07:55 PM ----------

 

Copper Clad Aluminum

 

[Tek18 10+ year member]

^^^^

what is the differenece in 1/0 Gauge and just " 0 " Gauge?

illl get the link he put up there ^

 

[mclerico83 5,000+ posts]

nothing 1/0 is 0 guage at 1 toy can get 2/0 4/0 guage wire 2

 

[Tek18 10+ year member]

ahh i see. well im going to order this soon.

now i need a hatch battery, and some cheap 0 gauge wire for the " big 3 " and the 250a , also with the extra little converters for the top of the batt so i can have more than 1 wire on it //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[Tek18 10+ year member]

ordered the Soundstream RUB1.1600D , and these :::

NEW Cadence CWM-6KIT Aluminum 6.5" Component Kit | eBay

for the crossover, what wires do i need / where do i store it

 

[Tek18 10+ year member]

also...

im very concerned with the 3" depth, i found a pair of speakers on crutchfield that were 2 15/16 deep and said they fit but i found a pair that are 3 1/16 and said they do not fit... so im concerned.. what if my speaker is mounted but not entirely haha, orrr another option?

 

[mclerico83 5,000+ posts]

its going to mount it just if the window will be able to close if not

MDF SPEAKER RING 6.5 1/2 INCH IN 1/2 THICK CUSTOME DOOR FIBERGLASS SPACER | eBay

2 of these

 

---------- Post added at 12:57 AM ---------- Previous post was at 12:56 AM ----------

 

im sure it will fit it says up to 3 inches so im sure 3 inches work.

 

[mclerico83 5,000+ posts]

those batteries are screw down, just need rings on the end of the wires

 

[Tek18 10+ year member]

Well on the big 3 videos they have these different things for if u use stock stuff for fuse box etc..... Cuz I looked under my hood and they tap around a piece of the battery, like a hook, very tall //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

And okay thanks //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[mclerico83 5,000+ posts]

take a picture of your battery terminals and post them on here so we can tell u the best way to go about it. you may need new battery terminals, you may not.

 

[mclerico83 5,000+ posts]

24K Gold-Plated Positive Battery Terminal 2x8AWG+0/4AWG | eBay

i have used these terminals, put the stock wiring in the holes and the new 1/0 is mounted on top