orangecounty1 10+ year member
CarAudio.com Veteran
ok so i have 2 sets of PG RSD 6.5" comps
its for a single cab truck, so eventually ill add maybe 4 8s or 2 10s or something, something small, so i prefer to run a 5ch amp and just save the 5th channel for when i add the subs.
in the meantime, i need to power the components.
i want at least 100w x 4 @ 4 ohms
or if i run a 4ch amp, i could do 200w x 2 @ 2 ohms (for both sets of comps wired in parallel) and save channel 3/4 and bridge that to the subs when i add them.
i kind of want to run the eD nine.5 but i cant find one.
if i run a 4ch, i was thinking maybe the kicker zx850.4
thats 215 x 2 @ 2 ohms (roughly 215w per compnent set, so around 100w per side in the long run) and then channel 3/4 is 425 bridged so i could run the subs with the 425w.
its for a single cab truck, so eventually ill add maybe 4 8s or 2 10s or something, something small, so i prefer to run a 5ch amp and just save the 5th channel for when i add the subs.
in the meantime, i need to power the components.
i want at least 100w x 4 @ 4 ohms
or if i run a 4ch amp, i could do 200w x 2 @ 2 ohms (for both sets of comps wired in parallel) and save channel 3/4 and bridge that to the subs when i add them.
i kind of want to run the eD nine.5 but i cant find one.
if i run a 4ch, i was thinking maybe the kicker zx850.4
thats 215 x 2 @ 2 ohms (roughly 215w per compnent set, so around 100w per side in the long run) and then channel 3/4 is 425 bridged so i could run the subs with the 425w.