Help end argument with friend

[globalminds_ent 10+ year member]

and that means absolutely nothing. as i said before, dont talk anymore.

u goin to far

 

[pro-rabbit 5,000+ posts]

That means it does rated at 4 ohms. Big deal.

Not exactly. Since no guidelines were ever put on testing methods, there is no way to tell how accurate something may or may not be. In most cases it was a way for cheater amps to be "legit" once again. However, it turned into a way for those over rated amps to get more buyers.

 

[sacsking916 5,000+ posts]

u goin to far

and you posted again. SMH

 

[globalminds_ent 10+ year member]

well I agreed with pro rabbit if he says cea means nothing and he has been in the lanes then I dissolve my statement we good people ?

 

[Falcons 5,000+ posts]

well I agreed with pro rabbit if he says cea means nothing and he has been in the lanes then I dissolve my statement we good people ?

That just proves you don't know what your talking about.

 

[ahole-ic]

well I agreed with pro rabbit if he says cea means nothing and he has been in the lanes then I dissolve my statement we good people ?

No. You say lots of stuff like it's for sure truth, and it turns out that you could not be more wrong. It's that way with everything you say. You're a complete idiot and you need to just read and not talk.

 

[SQ Monte 10+ year member]

Your amp will do more power than his, end of story. No question about it. His amp, on it's best day, will do 1500....you amp, on it's worst day, will do at least that. Take the bet, shut him up

 

[bgowdy 5,000+ posts]

Your amp will do more power than his, end of story. No question about it. His amp, on it's best day, will do 1500....you amp, on it's worst day, will do at least that. Take the bet, shut him up

i got agree. theres no way the fosgate is gonna put out more then your bxi. clean power yeah the fosgate hands down. full tilt open power (with clipping lol) the bxi. id do the bet if i were you

 

[Falcons 5,000+ posts]

It's so easy to say go for it when you have nothing to lose -_-

 

[ahole-ic]

Your amp will do more power than his, end of story. No question about it. His amp, on it's best day, will do 1500....you amp, on it's worst day, will do at least that. Take the bet, shut him up

I'm sure they have accurate clamp meters and know how to clamp brah.....

 

[globalminds_ent 10+ year member]

That just proves you don't know what your talking about.

agreed I was wrong he was right ,,,I thought cea was a way for a company to be legit since a lot of them don't get the cea rating.. But some do including rockford,, knowing the bd line to be solid I would FIGURE cea compliance to mean something but if it doesn't it just doesnt...retracted!

 

[SQ Monte 10+ year member]

It's so easy to say go for it when you have nothing to lose -_-

It's easy to say go for it when it's such an easy win!

I'm sure they have accurate clamp meters and know how to clamp brah.....

Nobody said they were gonna be the one's doing the clamping, or even had to know how. And just the same, nobody said they didn't have accurate clamp meters or know how. So WTF is your point?

 

[ahole-ic]

It's easy to say go for it when it's such an easy win!
Nobody said they were gonna be the one's doing the clamping, or even had to know how. And just the same, nobody said they didn't have accurate clamp meters or know how. So WTF is your point?

My point is you're encouraging these guys to compare amps based on blind speculation when based on their comments clearly do not have the means to test. So my point is that while your statements had the best of intentions you didn't think them out too well. Don't get offended, that wasn't my intent. It's the internet.

 

[sacsking916 5,000+ posts]

agreed I was wrong he was right ,,,I thought cea was a way for a company to be legit since a lot of them don't get the cea rating.. But some do including rockford,, knowing the bd line to be solid I would FIGURE cea compliance to mean something but if it doesn't it just doesnt...retracted!

i dont think he meant about the topic at hand, im gonna go out on a long limb and say (hope) he meant in general that you dont know what you're talking about

 

[conn.am 10+ year member]

It's easy to say go for it when it's such an easy win!

Nobody said they were gonna be the one's doing the clamping, or even had to know how. And just the same, nobody said they didn't have accurate clamp meters or know how. So WTF is your point?

I believe I will see if he wants to put his amp where his mouth is.

I know nothing of how to test. We were going to take it up to custom audio and ask them to do it. My experience with them has been iffy thought.