Help designing box for Obsidian V3's

[shauncox26]

i believe they would sound great in that enclosure. just watch the power u feed them. mine easily bottomed out in my large box on that kind of power. mainly on the lows an only at full tilt with my hatch open did i notice them bottoming out.

 

[Dmac1991]

yeahhhh that's a little bit too much power for that big of a box.

Try to shrink the box to 3.8 - 4cf net and that would work magic. Giving each sub 2.4cf net + overpowering them = unhappy subs = unhappy owner

 

[Da64u 10+ year member]

yeahhhh that's a little bit too much power for that big of a box.
Try to shrink the box to 3.8 - 4cf net and that would work magic. Giving each sub 2.4cf net + overpowering them = unhappy subs = unhappy owner

You're totally right, I wasn't paying attention or something... Do you know if they make 15 inch long 6" diameter flared ports?

 

[Dmac1991]

yessir they do.

Flared 6" Precision Ports are 17-18" long I believe

 

[FadedSpy 10+ year member]

This is what I'm planning to build for my Two Obsidian 12v3's

 

[FadedSpy 10+ year member]

I'll put Triangles in the corners so It'll knock down the ^ft a little bit, but this will be my cut list