Help buying an amp

[fofo302]

Hello I just recently got 2 Pioneer TS-SW2541D 10" subwoofers for my truck, I wanna Buy a hifonics Brutus Series Amplifier But im Not sure which one to buy, Can someone help me out please?

Pioneer TS-SW2541D specs:

Subwoofer Size 10"

Dual Voice Coil No

Impedance 4 ohms

Peak Power Handling 1000 watts

RMS Power Handling 50 - 250 watts

Woofer Surround 3-Layer Fiber

Woofer Composition IMPP composite

Sealed Box Volume 0.35 - 0.70 cubic feet

Ported Box Volume 0.35 - 0.70 cubic feet

Sensitivity 87 dB

Frequency Response 20 - 1 k Hz

Xmax (millimeters) 6 mm

Top Mount Depth 3"

Hifonics Brutus Series Amps Link

Thanks

Click to read more...

 

[hardhitta47 10+ year member]

looks like your subs are 4 Ohm svc, so you're gonna want your amp that does the power you need at 2 Ohms

 

[fofo302]

So the amp has to be 250W or 500W?? can you tell me which one to buy please..

 

[hardhitta47 10+ year member]

500+ W at 2 Ohms

 

[fofo302]

Do you think this amp: Hifonics BXi 1206D, is too much for both subs? is it ok?

Specs:

Amplifier Class N/A

Number of Channels 1 - Mono

RMS Power (4 ohms) 450 watts x 1 channel

RMS Power (2 ohms) 900 watts x 1 channel

RMS Power (1 ohm) 1200 watts x 1 channel

Bridged RMS Power Not Bridgeable

Peak Power Output

Minimum Impedance Unbridged 1 ohm

Minimum Impedance Bridged N/A

THD at Rated RMS Power

Speaker Level Inputs Yes

Amp Preamp Outputs Yes - 1 pair

Built-in Crossover Yes - LP

High-Pass Crossover Frequency

Low-Pass Crossover Frequency 35 - 250 Hz

Subsonic Filter 15 - 50 Hz

Signal-to-Noise Ratio >95 dB

Channel Separation N/A

Bass Boost 0 - 18 dB

Bass/Gain Remote Yes

 

[elkiko2004 10+ year member]

also you can try mmats 800.2 great amps

 

[01xtreme 10+ year member]

The BXi1206 should suit your needs well. a little overrated, so you can expect abour 650-750@ 2 ohms.

 

[fofo302]

thanks guys ill get The BXi1206