Agree that surface area is king. I like to take a chunk of aluminum block and grind down to frame or where ever and then attach my cables to the top of the block, usually attach block to frame via nut and bolt threw it, then tap and thread the block according to my needs.
so i can run short wire (1ft) from alt bracket to strut bolt and 2nd (2ft) wire on same bolt to battery? and remove the 1 i have on other strut or just leave it?
picture. its hard to say without knowing what it looks like. like i said thought make sure the body and frame are grounded.. form what it sounds like you can do that..
icooked duck for the first time. OMG its awesome. not even close to gamy like ive tasted n the past.. lol
in this picture here on left u see strut tower and alt so probably strut bolt closest to the black fuse box on left and then 2nd wire from that bolt to 1st closest batt terminal to strut right at the fuse box.. https://imgur.com/tTuKEDs also i thought i had put other completed pic up all that was just laid out nothing cut yet guess i'd rather not show the 1 wire i did.. i did sand spots really well with brush on drill though., so very shinny.. i did sand ground point beside battery so the factory ground has to be better than it was cause it won't good before..
N
One thing I've learned is seal that sh*t, I use to tape off a square around my frame grounds and spray black plasti dip over them with good long term results.
yeah i was gonna use clear coat going to walmart tomorrow, some peeps use plain grease which seems weird some use dielectric grease maybe better than clear coat idk just though the clear would be cheaper.. here's what ground points look like https://imgur.com/DQfKgJI
i let its cure in salt water and vinegar for 8 hours and then marinated it for 8 hours. alot of places its really gamey and really bold. this time it tasted much more iike yard bird than what people eat elsewhere. i think its the bomb and definitely a different taste from the normal..
What do you guys mean between frame and body? Like body of motor and Chassis frame?
My OEM negative battery ground is on one of my strut tower bolts connected by a tiny wire and was thinking of using that but will probly use alt bracket and oem chassis ground that’s nearby battery.
The frame and the ody (skin) are typically isolated to lower vibration. So you have to find a place to ground the frame to the body. Some cars are but most arent
Ahh I see what you meant my bad. Do most modern cars have accesible frame grounding in engine bay?
