Got My Stinger 1/0 and I'm lol-ing @ prochobo

[Beat_Dominator 5,000+ posts]

.....Not really but we both are posting about 1/0 with pics of our hands //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif

This stuff is pretty flexible, I'd say it must be pretty close to that Kicker stuff going by prochobo's pics. As you see I also got the sweet ring terminals for my amps (yes they take 1/0 ring terminals).

My crusty '79 quarter pwns //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif

Sorry about the blurr, it's too dark already //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

Click to read more...

 

[Blunt 10+ year member]

thats one nasty looking quarter

 

[yacob.naif 10+ year member]

Is that a ring terminal cut into a spade?

I didn't know any amp needed a spade that big!!!

 

[bamaboy 5,000+ posts]

that is some thisck insulation

 

[xpl0it 10+ year member]

That's some good *** wire, but be careful, DO NOT RUN IT NEAR ANYTHING WARM IN YOUR ENGINE AREA! That stuff melts very easily. It's the most flexible wire I've ever used, but it melts pretty easily, just run it safely and you'll be pleased. Stinger Expert series FTW

 

[Beat_Dominator 5,000+ posts]

Is that a ring terminal cut into a spade?
I didn't know any amp needed a spade that big!!!

Heh no it's a ring, just a dark background with too little light so it blended in.

 

[Beat_Dominator 5,000+ posts]

That's some good *** wire, but be careful, DO NOT RUN IT NEAR ANYTHING WARM IN YOUR ENGINE AREA! That stuff melts very easily. It's the most flexible wire I've ever used, but it melts pretty easily, just run it safely and you'll be pleased. Stinger Expert series FTW

Thanks for the tip! Shouldn't be an issue //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[azbass 5,000+ posts]

Woot. sexy

in god we rust??

 

[Eldorado 5,000+ posts]

wire is wire...n00bx

 

[xpl0it 10+ year member]

That is the easiest wire in the world to cut also, you could cut it in half by biting it, lol.

 

[azbass 5,000+ posts]

wire is wire...n00bx

you hater

hhehe

 

[Eldorado 5,000+ posts]

Thats your job

 

[azbass 5,000+ posts]

wire is wire...n00bx

Hater

 

[jujumantb 10+ year member]

That's some good *** wire, but be careful, DO NOT RUN IT NEAR ANYTHING WARM IN YOUR ENGINE AREA! That stuff melts very easily. It's the most flexible wire I've ever used, but it melts pretty easily, just run it safely and you'll be pleased. Stinger Expert series FTW

You should always use loom around the wire under the hood anyway. Actually, I believe it is a law that you have to IIRC.

 

[prochobo 10+ year member]

Loling at me? Newb biter //content.invisioncic.com/y282845/emoticons/spank.gif.0d78e34d42ea8780359e903aeb6697d6.gif lol

If you're really hardcore, you'd go and install it right now I just got done installing mine.