Good amp for two AB XFl 15's

  • 4
    Participant count
  • Participant list
Is that supposed to be cheap?
They can be had for 400 used very rarely less. Depending on condition. The vfl 4480 is 2200 rms and can be had for )320-$350 new. It also would be fine You say cheap but you haven't said what your budget is. You won't find a 2009+ watt rms amp for $200 I that's what you want

 
They can be had for 400 used very rarely less. Depending on condition. The vfl 4480 is 2200 rms and can be had for )320-$350 new. It also would be fine You say cheap but you haven't said what your budget is. You won't find a 2009+ watt rms amp for $200 I that's what you want
The reason i dont have a budget is because were trying to get all the numbers square away and see whats left for a amp.

 
The reason i dont have a budget is because were trying to get all the numbers square away and see whats left for a amp.
i do understand ,so any amp thats 2200-3000 rms will be fine , do you or have you bought the subs yet ?

 
What if i used that VFl 4480 on one subs but keep the gains low?
all i can say is that i know guys who have , some have blown the subs ,and a couple love the set up and have no problems .one of my customers, set hs 4480 one one xfl 12 at 1700 rms and the sub loved it all day long

 
all i can say is that i know guys who have , some have blown the subs ,and a couple love the set up and have no problems .one of my customers, set hs 4480 one one xfl 12 at 1700 rms and the sub loved it all day long
My buddy just needs some more time to get some money so we would just run one on that amp and then just remake the box when he gets the second XFL.

 
My buddy just needs some more time to get some money so we would just run one on that amp and then just remake the box when he gets the second XFL.
yea i understand ,the alpine amp will do 1000 rms at 4 ohms and 2000 rms at 2 ohms

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Getting a good voltage reading does not mean good power transfer. You could read 13.8v out of a 24 AWG wire. Recheck your amplifier's ground and...
2
213
No need to bypass the amp. Most use an LOC that takes the full amped signal and turns it into a flat RCA level signal. Here is the newest I have...
2
415
It would also be easy to add an equalizer to have individual rca inputs for all of the channels. A decent one can be had for less than $40...
6
495
  • Locked
NVX MVPA1 Best tiny amp Installed a bunch, but have one pushing a sealed 12 @ 2ohm in my daily beater Can bump it all day long and barely gets...
4
789

About this thread

Pyrofan

CarAudio.com Elite
Thread starter
Pyrofan
Joined
Location
Ga
Start date
Participants
Who Replied
Replies
14
Views
1,583
Last reply date
Last reply from
globalminds_ent
20240604_170857.jpg

metalheadjoe

    Jun 5, 2024
  • 0
  • 0
Screenshot_20240605_200209_Adobe Acrobat.jpg

Dylan27

    Jun 5, 2024
  • 0
  • 0

New threads

Top