krisfnbz
10+ year member
CarAudio.com Veteran
Okay guys so Im about to put a fresh brand new system in my girlfriends car.I drive it all the time so its practically mine anyways. And I pay for the mofo too. Anyways this is everything that I have ready. I got some pretty hefty discounts @ work as well... sick deals. I think its a **** good system for the price.
HU: CDA9883 @ $120 brand new accommodation
Front components: Rainbow 265 SLX's(Slightly used paid $150) from my setup
Rears coaxes: Alpine SPR17C's( brand new accommodation)
4 Channel amp kicker kx650.4($170 refurb from my setup)
2 Alpine type s 12 inch D2 subs( a piece brand new accommodation)
PDX1.600(Brand new accommodation)
Dynamat extreme 36 SQFT W/tool: $105(Enough to do both doors and entire trunk with some left over if I dont do dual layers on the doors)
Going sealed with the subs, box is a pre-made one at work it was I believe $20 made with 3/4 MDF though. Going for more Quality than loud.
Wiring: Going to get enough 1awg wire @ work for free to do the big 3, stock battery should be enough to power this setup. 16 ft long 1awg run to the rear $40, JL 9 wire run to the rear $20.. Rca's were about $20
Thats pretty much the $1k system that I will be soon instlalling. EVerything has been bought over the last 4 months. I have all the wiring in the dash already done just need to run the 9 wire to the rear with the rcas on one side, power on the other side, deaden both front doors, deaden the whole trunk and mount both amps to my rear seats(or maybe not)
Im going to go custom with this install and mount the tweeters in the dash...1992 civic.
Any insights? I was thinkin maybe instead of usin the kicker kx650.4, to go ahead and see if I can get a PDX4.100 to match the PDX1.600 I already have? What do you guys think about that?
HU: CDA9883 @ $120 brand new accommodation
Front components: Rainbow 265 SLX's(Slightly used paid $150) from my setup
Rears coaxes: Alpine SPR17C's( brand new accommodation)
4 Channel amp kicker kx650.4($170 refurb from my setup)
2 Alpine type s 12 inch D2 subs( a piece brand new accommodation)
PDX1.600(Brand new accommodation)
Dynamat extreme 36 SQFT W/tool: $105(Enough to do both doors and entire trunk with some left over if I dont do dual layers on the doors)
Going sealed with the subs, box is a pre-made one at work it was I believe $20 made with 3/4 MDF though. Going for more Quality than loud.
Wiring: Going to get enough 1awg wire @ work for free to do the big 3, stock battery should be enough to power this setup. 16 ft long 1awg run to the rear $40, JL 9 wire run to the rear $20.. Rca's were about $20
Thats pretty much the $1k system that I will be soon instlalling. EVerything has been bought over the last 4 months. I have all the wiring in the dash already done just need to run the 9 wire to the rear with the rcas on one side, power on the other side, deaden both front doors, deaden the whole trunk and mount both amps to my rear seats(or maybe not)
Im going to go custom with this install and mount the tweeters in the dash...1992 civic.
Any insights? I was thinkin maybe instead of usin the kicker kx650.4, to go ahead and see if I can get a PDX4.100 to match the PDX1.600 I already have? What do you guys think about that?
